Oops, I meant to include the link to the User's Manual: http://www.linuxcnc.org/docs/EMC2_User_Manual.pdf
Regards, Eric >> A lot of my programs consist of 3D curves built up out of small lines and even with a G64 P0.1 (or larger in mm) the system never reaches the programed feed rate and the CPU load reaches of up to 95%. << Just how short are your curves and when you say "small lines", do you mean G1 or G2/G3 moves? If using G1 moves with very short vectors you can be velocity limited based on the length of the vectors. See section 2.1.4 of the User's Manual. I have excerpted the important part below. ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
