Check bottom of page for Motor Sizing software. http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Suppliers
-----Original Message----- From: Dave Engvall [mailto:[email protected]] Sent: Friday, January 23, 2009 3:57 PM To: Enhanced Machine Controller (EMC) Subject: [Emc-users] matching servo motor to axis Hi all, Does anyone know of a good worksheet for working thru the design parameters for a servo drive. eg. given: servo motor of a given torque and speed; gear reduction ball screw dia and pitch desired accel and velocity weight of the axis coeff of friction for the slides and probably things I've not thought of. With a good set of specs it ought to be possible to calculate ... yes this will work ... or it is beyond the given parameters. TIA Dave ---------------------------------------------------------------------------- -- This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
