All I got around to try to move my motors today, Whole list of little problem the last being some bad Opto unit shutting the amps down. Now that I'm past that when I try to jog an axis I get the following error in the terminal screen. Could some explain what going on and what I need to do about it?
libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. ********************************************************** * Current Directory = /home/donnie/emc2/configs/hurco * ********************************************************** * BufferName = emcError * BufferType = 0 * ProcessName = emc * Configuration File = emc.nml * CMS Status = -7 (CMS_QUEUE_FULL:= A write failed because queuing was enabled but there was no room to add to the queue. ) * Recent errors repeated: Error on axis 0, command number 208 CMS: emcError message queue is full. (continued) CMS: Message requires 272 bytes but only 0 bytes are left. Error on axis 0, command number 180 * BufferLine: B emcError SHMEM localhost 8192 0 0 3 16 1003 TCP=5005 xdr queue * ProcessLine: P emc emcError LOCAL localhost W 0 1.0 0 0 * error_type = 8 () ************************************************************ hm2/hm2_5i23.0: encoder.00 dT <= 0, how can this be? libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. hm2/hm2_5i23.0: encoder.00 dT <= 0, how can this be? libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. hm2/hm2_5i23.0: encoder.00 dT <= 0, how can this be? libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. hm2/hm2_5i23.0: encoder.00 dT <= 0, how can this be? libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. hm2/hm2_5i23.0: encoder.00 dT <= 0, how can this be? libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. hm2/hm2_5i23.0: encoder.00 dT <= 0, how can this be? libnml/cms/cms_in.cc 1484: CMS: emcError message queue is full. libnml/cms/cms_in.cc 1485: (continued) CMS: Message requires 272 bytes but only 0 bytes are left. Shutting down and cleaning up EMC2... Cleanup done don...@mill:~$ ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
