Here is another source for the same motor: http://www.gazaur.com/twe/index.php?cPath=3
It appears they sell the controller as well: http://www.gazaur.com/twe/product_info.php?products_id=322 I hope this helps. Dean Hedin wrote: > Take this one for example: > > http://www.hobby-lobby.com/brushless-gazaur.htm > > The R/C motors are rated with "Kv". Which means rpms per volt with no load. > The above motor is rated at 4100kv and can go up to 12volts. > So that would be 49200 rpm. > > If you want to seach google again try "R/C Brushless Motors" > > Be advised you will require a special controller/driver for these motors. > > ----- Original Message ----- > From: "Gene Heskett" <[email protected]> > >> Unforch, I just spent 15 minutes googling for those, and found absolutely >> zero >> real information on those motors. And I don't buy pigs in a poke I can't >> see >> through. >> >> > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
