Hi Amund,
If the equipment is to be used by a normal or instructed person then it will still need two safeguards for a Class 3 energy source. It would be a very rare piece of equipment that only gets used by a skilled person! All the best James James Pawson Managing Director & EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy www.unit3compliance.co.uk <http://www.unit3compliance.co.uk/> | [email protected] <mailto:[email protected]> +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 Office hours: Every morning my full attention is on consultancy, testing, and troubleshooting activities for our customers' projects. I'm available/contactable between 1300h to 1730h Mon/Tue/Thurs/Fri. For inquiries, bookings, and testing updates please send us an email on <mailto:[email protected]> [email protected] or call 01274 911747. Our lead times for testing and consultancy are typically 4-5 weeks. From: Amund Westin <[email protected]> Sent: 12 November 2024 06:20 To: [email protected] Subject: [PSES] Safeguard - Skilled person IEC TR 62368-2:2019:, Ch.4.3.4 "Safeguards for protection of a skilled person", table 1: Skilled persons require 0 safeguard to Class 3 energy source. Does this requirement make influence on the creepage and clearance distances? BR Amund _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 -- This email has been checked for viruses by AVG antivirus software. www.avg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
