In other words, is it allowed to have GND and LIVE in adjacent PCB layers?
BR Amund Fra: Amund Westin Sendt: 11. november 2024 10:25 Til: [email protected] Emne: [PSES] SV: [PSES] Creepage Live-Ground Ref. picture below . would the clearance be different in a case if we had a solid ground plane and solid LIVE AC plane on a PCB? Let's say the planes were layer 2 and 3 in a 4-layer PCB. There must be some connection point to both layers, which could look like the picture below, but let's say the there is a connection area on the PCB where the GND and LIVE are >> 20mm from each other. But the two layers are maybe 0.5mm from each other. BR Amund Fra: Amund Westin Sendt: 5. november 2024 14:51 Til: [email protected] <mailto:[email protected]> Emne: [PSES] Creepage Live-Ground Pin with 230VAC through the FR4 PCB with spacing to the inner ground plane. Creepage: Which table in the EN 62368-1:2020 apply? BR Amund _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
