I would add that either a generic standard like IEC 61000-6-1 ( Immunity for residential, commercial
and light-industrial environments) or a dedicated product or product-family EMC immunity standard is needed for test level and immunity criteria. As John points out, 61000-4-3 only tells you how to do the testing. Ralph From: John Woodgate <[email protected]> Sent: November 7, 2024 8:01 AM To: [email protected] Subject: Re: [PSES] IEC 61000-4-x standards Your partner is misguided. the IEC 61000-4-X series are methods of measurement standards, called 'Basic' standards. Products do not comply with them, but with the relevant product (or product-family) standard that sets limits and refers to the 4-X standard for the method of measurement. IEC 61000-4-3 is certainly still in effect. See: https://webstore.iec.ch/en/iec-search/result?q=61000-4-3 <https://webstore.iec.ch/en/iec-search/result?q=61000-4-3&p=1&f=eyJkYXRlUmFuZ2VzIjp7fSwidGVybXMiOnt9LCJ2YWxpZE9ubHkiOnRydWUsInB1YmxpY2F0aW9uSWRzIjpudWxsLCJzaG93VHJmIjpmYWxzZSwiZGlzcGxheU1vZGUiOiJsaXN0In0=> &p=1&f=eyJkYXRlUmFuZ2VzIjp7fSwidGVybXMiOnt9LCJ2YWxpZE9ubHkiOnRydWUsInB1YmxpY2F0aW9uSWRzIjpudWxsLCJzaG93VHJmIjpmYWxzZSwiZGlzcGxheU1vZGUiOiJsaXN0In0= Which 4-X standards apply depends on what sort of product it is - computer, appliance, lighting etc.. On 2024-11-07 15:42, Brian Gregory wrote: Good morning EMC experts, Even though we're a provider to N. American markets, this has jumped up at me recently. 1. A partner claims they want compliance to IEC 61000-4-13 (Part 3). a. this is limited to equipment 16A, right? b. what does the title refer to when it says " Mains Signalling at A.C. Power Port " ? 2. Older standards (specially UL 2231-2) call out IEC 61000-4-3 for immunity testing, which I remember from {ahem} a while ago. However, -4-3 isn't on the ANSI Webstore for IEC 61000 series standards - is it still active? Which of the IEC 61000-4-x series are most applicable to FCC / Class B residential equipment? thanks all, Colorado Brian _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 -- OOO - Own Opinions Only Best Wishes John Woodgate Keep trying <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
