I was thinking conducted emissions in the context of average detectors.
From: Brent DeWitt <[email protected]> Sent: Friday, April 5, 2024 3:48 PM To: [email protected]; [email protected] Subject: Re: [PSES] Radiated Emissions - How many points to QP? Could you clarify when you would choose to use an average detector for radiated emissions between 30 and 1000 MHz? On 4/5/2024 6:39 PM, Ralph McDiarmid wrote: I’m having trouble with “Of those disturbances above (L-20dB), where L is the limit level in logarithmic units, the disturbance levels and the frequencies of at least the six highest disturbances shall be recorded.” Does this CISPR measurement methods standard expect you to record the six highest signals which are less than or equal to -20dB wrt the average limit when using an average detector and the QP limit when using a QP detector? Perhaps that is made clear in the product-specific standard (like EN55022 or CISPR 11, etc) Comments? Ralph From: Stultz, Mark <mailto:[email protected]> <[email protected]> Sent: Friday, April 5, 2024 12:33 PM To: [email protected] <mailto:[email protected]> Subject: [PSES] Radiated Emissions - How many points to QP? Hello PSES brain trust, When doing radiated emissions measurements, how many frequencies should be quasi-peaked? CISPR 16-2-3 clause 6.4.9 states: “Of those disturbances above (L-20dB), where L is the limit level in logarithmic units, the disturbance levels and the frequencies of at least the six highest disturbances shall be recorded.” We have always done QP measurements on all peak measurements above the limit, even if that is more than six points. I have a lab arguing that they only need to measure the top six, regardless of how many peak measurements are above the limit. Any thoughts are appreciated. Thanks, Mark _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
