I'm working with a new lab and new product using IEC 62368-1 3rd Ed. they are asking the company to perform production line test dielectric voltage withstand test of 3600 Vp or DC 1 to 4 seconds on Ethernet port connector RJ45 and Pro Audio XLR connector sockets? "Between primary to other accessible conductive part- L/N of plus pins to accessible unearthed socket terminals"
Can I use the IEC 62368-1 3rd Ed. blunt probe of Figure V.3 to show that the pins are not accessible and need not be tested? Anyone else must production line Hipot Ethernet port connector RJ45 or Pro Audio XLR connector sockets? Thank you for the help. Chuck NOTICE: This email may contain confidential information. Please see https://meyersound.com/legal/#email-policy for our complete policy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
