I'd appreciate feedback about steps to take if a small batch of labels were printed/applied/shipped with an erroneous format. A friend with whom I worked years ago posed the question during a long overdue lunch. I tried searching a few NRTL sites and PSTC archives but didn't find a link or documentation that I could pass along. There was an early 2023 PSTC discussion about maintaining UL label *with field modifications* but the question was strictly about the label format (logo, unique ID). The power/voltage/current values are correct. Seems like an odd case to me.
Might anyone have a link, document or experience that would help clarify the direction to take? Many thanks, Adam in Atlanta [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
