Carl The OJ summary lists amendments separately, as published, it does not list “standard plus amendment(s)” as you typically write on a DoC
The relevant legislation for this change EN 61010-1 is Commission Implementing Decision (EU) 2020/1779<https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv%3AOJ.L_.2020.399.01.0006.01.ENG&toc=OJ%3AL%3A2020%3A399%3ATOC> of 27 November 2020 EN 61010-1:2010 ceased to provide a presumption of conformity on 30th May 2022 In order to maintain presumption of conformity, A1:2019 must also be applied (along with AC:2019, but that doesn’t need to be listed on the DoC) Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: [email protected] <[email protected]> Sent: 06 February 2023 14:18 To: [email protected] Subject: [PSES] Appropriate reference for EN standard within CB Report Hello All, I've included a snip here and I don't recall whether the list server will allow that so I'll also include the text. I checked on the revision status of EN 61010-1 within the OJ and I'm confused because the current reference includes the withdrawn revision. EN 61010-1:2010 was withdrawn as of 30/11/2020 but it's also included within the current reference as follows: EN 61010-1:2010, EN 61010- 1:2010/A1:2019/AC:2019-04, EN 61010-1:2010/A1:2019 [cid:[email protected]] Is this due to the long-standing CENELEC confusion? Does this mean that all of these references belong on a manufacturers DoC? Or any one of them? (e.g. EN 61010-1:2010/A1:2019/AC:2019-04) Does this mean that the original EN 61010-1:2010 is still allowed without the addition of A1:2019? I'm reviewing a draft CB report and I want to get the "EN" reference within the report to line-up with this requirement if possible. Thanks, Carl - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
