Hello All,
I've included a snip here and I don't recall whether the list server
will allow that so I'll also include the text.
I checked on the revision status of EN 61010-1 within the OJ and I'm
confused because the current reference includes the withdrawn revision.
EN 61010-1:2010 was withdrawn as of 30/11/2020 but it's also included
within the current reference as follows:
EN 61010-1:2010,
EN 61010-
1:2010/A1:2019/AC:2019-04,
EN 61010-1:2010/A1:2019
Is this due to the long-standing CENELEC confusion?
Does this mean that all of these references belong on a manufacturers
DoC? Or any one of them? (e.g. EN 61010-1:2010/A1:2019/AC:2019-04)
Does this mean that the original EN 61010-1:2010 is still allowed
without the addition of A1:2019?
I'm reviewing a draft CB report and I want to get the "EN" reference
within the report to line-up with this requirement if possible.
Thanks,
Carl
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
