Hello Chris, “…the test is carried out at ambient temperature equal to the minimum ambient temperature specified by the manufacturer or -33°C if no minimum ambient temperature is specified, for 24 h.”
Ryan Jayasinghe Regulatory Compliance Engineer [email protected]<mailto:[email protected]> "After silence, that which best expresses the inexpressible, is music" - Aldous Huxley LINE6 26580 Agoura Road Calabasas CA 91302 818.575.3711 line6.com ampeg.com From: Chris <[email protected]> Sent: Wednesday, October 26, 2022 8:56 AM To: [email protected] Subject: [EXTERNAL] Re: [PSES] IEC 62368-1 ES3/PS3 cold impact test temperature You don't often get email from [email protected]<mailto:[email protected]>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Thanks Don. Do you know at what temperature is the cold impact test done? Christopher On Friday, October 21, 2022 at 05:04:33 AM PDT, Don Gies <[email protected]<mailto:[email protected]>> wrote: Christopher, Per Annex Y.6, you have to consider performing the cold impact tests on polymeric outdoor enclosures housing class 3 energy sources. Best regards, Don Gies ________________________________ Folks, When do we need to do IEC 62368-1 ES3/PS3 cold impact test as per IEC 62368-1 Third edition. I was told if EUT is powered by ES3/PS3 then it is required. any insight will be helpful Thanks in advance Christopher - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
