Hi Christopher, This is applicable for outdoor product. IP test follows cold impact test.
Best regards, Boštjan From: Don Gies <[email protected]> Sent: Friday, October 21, 2022 2:04 PM To: [email protected] Subject: Re: [PSES] IEC 62368-1 ES3/PS3 cold impact test CAUTION: This email originated from outside of our organisation. Do not click links or open attachments unless you recognise the sender and know the content is safe. Christopher, Per Annex Y.6, you have to consider performing the cold impact tests on polymeric outdoor enclosures housing class 3 energy sources. Best regards, Don Gies Internal From: Chris <[email protected]<mailto:[email protected]>> Sent: Thursday, October 20, 2022 5:43 PM To: [email protected]<mailto:[email protected]> Subject: [PSES] IEC 62368-1 ES3/PS3 cold impact test [External email: Use caution with links and attachments] ________________________________ Folks, When do we need to do IEC 62368-1 ES3/PS3 cold impact test as per IEC 62368-1 Third edition. I was told if EUT is powered by ES3/PS3 then it is required. any insight will be helpful Thanks in advance Christopher - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Femc-pstc.html&data=05%7C01%7Cdonald.gies%40se.com%7C91fb203f016b4a7b14d808dab2e41970%7C6e51e1adc54b4b39b5980ffe9ae68fef%7C0%7C0%7C638018989994406040%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=3fR86FvR9FnFrydfJuBOHT5UaZmIJqXaO36RWYT2TmY%3D&reserved=0> Website: http://www.ieee-pses.org/<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2F&data=05%7C01%7Cdonald.gies%40se.com%7C91fb203f016b4a7b14d808dab2e41970%7C6e51e1adc54b4b39b5980ffe9ae68fef%7C0%7C0%7C638018989994406040%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=XZQ9lyNiEjqPUOw9Ozv7bvxzsGrc6vHtIrIBubfYro0%3D&reserved=0> Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flist.html&data=05%7C01%7Cdonald.gies%40se.com%7C91fb203f016b4a7b14d808dab2e41970%7C6e51e1adc54b4b39b5980ffe9ae68fef%7C0%7C0%7C638018989994406040%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=4t2biSBxpuD4Y1aVZUtUhfO4cRlFRG20aIGUTQ0Eov0%3D&reserved=0> List rules: http://www.ieee-pses.org/listrules.html<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flistrules.html&data=05%7C01%7Cdonald.gies%40se.com%7C91fb203f016b4a7b14d808dab2e41970%7C6e51e1adc54b4b39b5980ffe9ae68fef%7C0%7C0%7C638018989994406040%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=rwlwUMrfqCmun1L3fefsBkOLZFbdTFs9tG886n90fFE%3D&reserved=0> For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
