Thanks Don.
Do you know at what temperature is the cold impact test done?
Christopher
On Friday, October 21, 2022 at 05:04:33 AM PDT, Don Gies
<[email protected]> wrote:
Christopher,
Per Annex Y.6, you have to consider performing the cold impact tests on
polymeric outdoor enclosures housing class 3 energy sources.
Best regards,
|
Don Gies
|
Folks,
When do we need to do IEC 62368-1 ES3/PS3 cold impact test as per IEC 62368-1
Third edition.
I was told if EUT is powered by ES3/PS3 then it is required.
any insight will be helpful
Thanks in advance
Christopher
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
