Hi all, the "Guide to application of the Machinery Directive 2006/42/EC", Edition 2.2: https://ec.europa.eu/docsroom/documents/38022 states:
"...Thus, whilst machinery with an electrical supply, which is not in any of the categories listed in Article 1(2) (k) of MD, shall fulfil the safety objectives of the LVD, the manufacturer’s EC Declaration of conformity shall not refer to the LVD but to the MD". Yet, EN60204-1:2018 is listed in the LVD summary of harmonised standards. Would it harm to state also the LVD conformity in a DoC for machinery? The above mentioned guide writes that the DoC "shall *not* refer to the LVD but to the MD" but I'm not sure about the intention behind. And we have problems with Turkish customs insisting that the DoC shall list also LVD compliance. I wonder whether / how I can phrase an elegant note on the LVD compliance. Any ideas? Oliver - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
