Hi Charles, Only slightly off your topic "Has anyone experienced having an ITE product that complies with IEC60950 requirements, but does not comply with some portions IEC 62368?" I work on the audio side so our base standard is 60065. So to rephrase the question; "Has anyone experienced having an audio product that complies with IEC 60065 requirements, but does not comply with some portions IEC 62368? " I was informed during factory audit the Hipot test voltage changed from 1500 VAC to 1768 VAC ?
Oh, and outdoor use also changes from IEC 62368 2ed, calls for using 60950-22 at current editions, which the 2005 edition did not require a dust test, but new (required) 2nd edition requires a dust test, where as 60065 required only IPX4 testing. Let the testing begin! Respectfully, Chuck August-McDowell From: Charles Jackson <[email protected]> Sent: Wednesday, September 16, 2020 7:57 AM To: [email protected] Subject: [PSES] Demonstrating Compliance to the LVD w/o using 62368 [EXTERNAL EMAIL] Has anyone experienced having an ITE product that complies with IEC60950 requirements, but does not comply with some portions IEC 62368? In particular the use of a non-LPS psu. Is there some sort of risk analysis that can be done to prove up conformance to the directive based on 60950 with or without supplemental test?? Thanks in advance Chuck - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> NOTICE: This email may contain confidential information. Please see https://meyersound.com/legal/#email-ms for our complete policy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
