Guess I was 'dreaming'  hihi  It has been a while since I owned the one K1 
so.....ok...tnx 
 
> From: [email protected]
> To: [email protected]
> CC: [email protected]
> Subject: RE: [Elecraft] Found a K1!
> Date: Mon, 19 Jan 2015 10:45:30 -0500
> 
> I think so... (a dream). I have a K1 now, and have had a few of them in the
> past. There can only be 1 band board in at a time, although the K1 will
> remember the VFO calibration for all the bands, across the boards you have.
> The only time this is an issue is if you have two different modules with the
> same band, like 40/30/20/15 on a 4 band board, and 40/17 on a 2 band board.
> 
> GL,
> Bruce N1RX
> 
> ________________________________________
> From: James Rodenkirch [mailto:[email protected]] 
> Sent: Monday, January 19, 2015 10:35 AM
> To: Bruce Beford; [email protected]
> Subject: RE: [Elecraft] Found a K1!
> 
>  Bruce: don't consider this the beginning of an argument but.....I recall
> having both modules installed, at the same time, in my previous K1......was
> I dreaming that??
> 
>  
> > From: [email protected]
> > To: [email protected]
> > CC: [email protected]
> > Subject: Re: [Elecraft] Found a K1!
> > Date: Mon, 19 Jan 2015 10:08:46 -0500
> > 
> > > Going to have the two band module changed to 80/17 and, when not 
> > > traveling, will swap out the ATU for the two band module and have an 
> > > 80/40/30/20/17/15 rig (already have an auto tuner at the base of my 30' 
> > > vertical).
> > 
> > Jim,
> > since you had a K1 in the past, you probably remember this, but others may
> > not be aware... You cannot "swap out the ATU for the 2 band board". The
> ATU
> > does need to be removed to replace the 4 band board with the 2 band board
> as
> > the band board sits below the ATU in a "stacked" configuration". But- both
> > band boards cannot be in at the same time.
> > 
> > As I say, I am pretty sure you know this, but wanted to mention it for the
> > benefit of others who may not know.
> > 
> > 72,
> > Bruce N1RX
> > 
> > 
> 
> 
                                          
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to