Bruce: don't consider this the beginning of an argument but.....I recall having both modules installed, at the same time, in my previous K1......was I dreaming that?? > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [Elecraft] Found a K1! > Date: Mon, 19 Jan 2015 10:08:46 -0500 > > > Going to have the two band module changed to 80/17 and, when not > > traveling, will swap out the ATU for the two band module and have an > > 80/40/30/20/17/15 rig (already have an auto tuner at the base of my 30' > > vertical). > > Jim, > since you had a K1 in the past, you probably remember this, but others may > not be aware... You cannot "swap out the ATU for the 2 band board". The ATU > does need to be removed to replace the 4 band board with the 2 band board as > the band board sits below the ATU in a "stacked" configuration". But- both > band boards cannot be in at the same time. > > As I say, I am pretty sure you know this, but wanted to mention it for the > benefit of others who may not know. > > 72, > Bruce N1RX > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
