2nd try, first had a html e-mail Hello, my new K3/100F has arrived on Saturday. So I removed my IC-7400 from the position right to the screen and put it on the left. The IC-7400 is now my dedicated 6m an 2m SSB/CW radio. On the right sits the K3 now. Please have a look: http://files.qrz.com/i/dl1oli/dl1oli_K3_k.jpg
I already had a Ftdi USB-seriell interface and now use this for control of the K3. I made all of the connections to the PC, Amp, antennas ect. I even had made cable with the right 3.5 mm connectors (stereo for speaker/line-out and mono for line/mic in). I configured Ham-Radio-Deluxe 5 for the K3. Now I have two problems: 1. If I use the DX-cluster in HRD Logbook an click on an dx-entry which is not on the same band where the K3 is, then the K3 changes to the new frequency, an directly after it goes back to the old frequency. For example. The K3 is on 14300 kHz, in the HRD-Logbook dx-cluster is an entry for 21400 kHz. Then the K3 changes shortly to 21400 and immediately goes back to 14300. ? 2. The rear line-in does not work. I connected my sound-card to the line-in with an 3.5 mm mono connector on the radio-end. I used the MAIN menu to change the source to line in. But tthen it does not modulate on TX. If I connect the same cable from the sound-card in the rear microphone instead of line-in, then the K3 modulates. I tried USB and DATA A modes. The Sound-card and cable is OK because it works in the rear-mic. ? I made some contacts in the CQ WPX-RTTY contest on the weekend. I used HRD and DM780 for casual contesting. So far it works nicely. I have a 250 Hz Filter installed and this is very good for strong nearby RTTY-stations on 40 m. I configured the 250 Hz Filter as a 300 Hz. Do you have hints or solutions for my two problems? 73 Oli DL1OLI/AJ4UR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
