On Fri, 2005-03-11 at 11:54 +0000, Ian J Maude wrote: > I really should have added that the on/off, display, menus etc all > work. > The K2 sees the additional boards etc so it would seem that DC power > is > not the problem. ok, getting there. I decided as I had already done a reset that I would start the alignment steps again. It would seem that the PLL range is in order but I get nothing except a row of zero's when looking at the VCO on TP1. It should be between 8 and 10MHz so I am getting close. Now down to those pesky voltages :-)
Ian -- Ian Maude G0VGS Morecambe Lancs UK | [EMAIL PROTECTED] Sysop of GB7MBC, the Morecambe Bay Cluster Running Linux and DXSpider | K2 #4044 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
