I don't have an 850S, but you could try an external negative dc supply
(say -9v to 0v) on the radios ALC input. That should vary the output
from zero upwards.
Most of the Kenwood range have a Din socket transverter port on the rear
apron which outputs a couple of milliwatts or so although I suspect this
may be too little drive for the 222 or you would be using it :-)
gl
Trev G3ZYY
In message <[EMAIL PROTECTED]>, W9DHI
<[EMAIL PROTECTED]> writes
I'm helping a friend out who bought a 222 transverter from Elecraft but
wants to use it with his TS850S. The 850 will only go down to 9 watts and
the Elecraft wants a max of 8 watts, any help out there???
Gregg R. Lengling, W9DHI, Retired
Administrator http://www.milwaukeehdtv.org
K2/100 S#3075 KX1 S# 57
Member: ARRL, RSGB, RCA, WERA and ORC
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
Trevor Day
SIP: [EMAIL PROTECTED]
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
