Any help, please.
On Thu, Jun 5, 2014 at 5:32 PM, Arpit Kumar <arp8...@gmail.com> wrote: > Hi all, > I have machines set up (say m1 and m2) and an external openflow controller > (say C). > I have an ovs-switch on m1 which has some flow rules and the machine m2 is > sending tcp packets to m1 via the ovs switch. > > When the flow rules are > ip, nw_src=<ip of m2>, actions=NORMAL,CONTROLLER > actions=NORMAL > the tcp packets sent by the m2 and perhaps every ip packet sent by m2 to > m1 is sent to the controller. > dump-flows also confirms this as the packets of the first rule is not zero. > > But to filter only tcp packets when i set the flow rules as > tcp, nw_src=<ip of m2>, actions=NORMAL,CONTROLLER > actions=NORMAL > no tcp packets are detected by the ovs-switch and sent to controller. > dump-flow shows that no packets are following the tcp rule. > > I am unable to understand why this is occurring and am stuck at this point > from quite some time. > > Please help me in this regard and tell the reason why ip packets are > detected properly but not the tcp packets. > > > Regards, > Arpit Kumar > -- Arpit Kumar Third Year Undergraduate Department of Computer Science and Engineering Indian Institute of Technology, Kharagpur
_______________________________________________ discuss mailing list discuss@openvswitch.org http://openvswitch.org/mailman/listinfo/discuss
