On Wed, Nov 13, 2013 at 2:09 PM, Sudarshan Pathalam (supathal)
<[email protected]> wrote:
> Gurucharan,You are right.
>
> host:~# brctl show
> bridge name     bridge id               STP enabled     interfaces
> virbr0          8000.fe5400df9430       yes             vnet0
>
> I had hoped, virt-install with, --bridge br1 option, would have associated
> vnet0 with br1 (ovs)
> So should I brctl delif of vnet0,virbr0 and followed by ova-vsctl add-port
> of vnet0,virbr0?

If you want to do it that way, do it carefully. I would assume that
libvirt would have setup up some iptables rules for the NAT case. So
doing things beneath libvirt may surprise you eventually when you
shutdown or recreate your VM. I have never tried OVS in a NAT mode and
I don't know whether it will work well with the iptables rules. There
is libvirt support for OVS in "bridged networking" mode. I would do it
that way. It is much more useful if you plan to use OVS in your
hypervisors.

>
> Thanks,
>
>
>
> On 11/13/13 11:32 AM, "Gurucharan Shetty" <[email protected]> wrote:
>
>>On Wed, Nov 13, 2013 at 11:26 AM, Sudarshan Pathalam (supathal)
>><[email protected]> wrote:
>>> Hello,
>>>
>>> I have KVM and OVS setup in Ubuntu 12.04 server,running couple of VM.
>>> I'd like to test OpenFlow on OVS while allowing bidirectional traffic
>>> between VM (in private subnet) and hosts on the physical LAN (in public
>>> subnet).
>>> Created OVS bridge,
>>>
>>> host:~#ovs-vsctl add-br br1
>>> host:~#ovs-vsctl add-port eth1
>>> host:~#ovs-vsctl add-port br1 eth1
>>>
>>> Created VM,
>>> host:~#virt-install --connect qemu:///system --name vm1 --ram 2000
>>>--vcpus 2
>>> --disk /var/lib/libvirt/images/vm1.img --cdrom
>>> /var/lib/libvirt/ubuntu-12.04.3-server-amd64.iso --graphics vnc
>>>--virt-type
>>> kvm --bridge br1
>>>
>>> host:~#ovs-vsctl show
>>> 4d79704f-06ec-41cb-a8dd-d38a82e7ad17
>>>     Bridge "br1"
>>>         Port "br1"
>>>             Interface "br1"
>>>                 type: internal
>>>         Port "eth1"
>>>             Interface "eth1"
>>>
>>> host:~# ovs-vsctl list-ports br1
>>> eth1
>>>
>>> Right now I have the following interfaces,
>>> br1,eth0,eth1,lo,ovs-system,virbr0,vnet0 etc
>>>
>>> host:~# lsmod | grep br
>>> bridge                 90989  0
>>> stp                    12976  1 bridge
>>> root@supathal-2:~# lsmod | grep open
>>> openvswitch            66857  0
>>>
>>> (Noob) Questions,
>>>
>>> I was hoping to see vnet0 (I guess this is vnic of VM) as a port in br1
>>> above. Does it require extra steps?
>>> Was wondering
>>>
>>> if I could bind eth1 to virbr0 (no ip address on eth1 instead apply ip
>>> address to virbr0)
>>> attach virbr0 to br1 (OVS) and configure iptables
>>It looks to me that your VMs are not talking through OVS but rather
>>through linux bridge. (brctl show may provide hints)
>>'ovs-vsctl show' should be showing VMs attached to a bridge.
>>
>>I generally use libvirt to attach VM interfaces to OVS. There is a
>>INSTALL.Libvirt that explains how to integrate OVS with libvirt.
>>
>>
>>
>>>
>>> Thanks in advance,
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> discuss mailing list
>>> [email protected]
>>> http://openvswitch.org/mailman/listinfo/discuss
>>>
>
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss

Reply via email to