Gurucharan,You are right. host:~# brctl show bridge name bridge id STP enabled interfaces virbr0 8000.fe5400df9430 yes vnet0
I had hoped, virt-install with, --bridge br1 option, would have associated vnet0 with br1 (ovs) So should I brctl delif of vnet0,virbr0 and followed by ova-vsctl add-port of vnet0,virbr0? Thanks, On 11/13/13 11:32 AM, "Gurucharan Shetty" <[email protected]> wrote: >On Wed, Nov 13, 2013 at 11:26 AM, Sudarshan Pathalam (supathal) ><[email protected]> wrote: >> Hello, >> >> I have KVM and OVS setup in Ubuntu 12.04 server,running couple of VM. >> I'd like to test OpenFlow on OVS while allowing bidirectional traffic >> between VM (in private subnet) and hosts on the physical LAN (in public >> subnet). >> Created OVS bridge, >> >> host:~#ovs-vsctl add-br br1 >> host:~#ovs-vsctl add-port eth1 >> host:~#ovs-vsctl add-port br1 eth1 >> >> Created VM, >> host:~#virt-install --connect qemu:///system --name vm1 --ram 2000 >>--vcpus 2 >> --disk /var/lib/libvirt/images/vm1.img --cdrom >> /var/lib/libvirt/ubuntu-12.04.3-server-amd64.iso --graphics vnc >>--virt-type >> kvm --bridge br1 >> >> host:~#ovs-vsctl show >> 4d79704f-06ec-41cb-a8dd-d38a82e7ad17 >> Bridge "br1" >> Port "br1" >> Interface "br1" >> type: internal >> Port "eth1" >> Interface "eth1" >> >> host:~# ovs-vsctl list-ports br1 >> eth1 >> >> Right now I have the following interfaces, >> br1,eth0,eth1,lo,ovs-system,virbr0,vnet0 etc >> >> host:~# lsmod | grep br >> bridge 90989 0 >> stp 12976 1 bridge >> root@supathal-2:~# lsmod | grep open >> openvswitch 66857 0 >> >> (Noob) Questions, >> >> I was hoping to see vnet0 (I guess this is vnic of VM) as a port in br1 >> above. Does it require extra steps? >> Was wondering >> >> if I could bind eth1 to virbr0 (no ip address on eth1 instead apply ip >> address to virbr0) >> attach virbr0 to br1 (OVS) and configure iptables >It looks to me that your VMs are not talking through OVS but rather >through linux bridge. (brctl show may provide hints) >'ovs-vsctl show' should be showing VMs attached to a bridge. > >I generally use libvirt to attach VM interfaces to OVS. There is a >INSTALL.Libvirt that explains how to integrate OVS with libvirt. > > > >> >> Thanks in advance, >> >> >> >> >> _______________________________________________ >> discuss mailing list >> [email protected] >> http://openvswitch.org/mailman/listinfo/discuss >> _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
