Hello,
I have KVM and OVS setup in Ubuntu 12.04 server,running couple of VM.
I'd like to test OpenFlow on OVS while allowing bidirectional traffic between
VM (in private subnet) and hosts on the physical LAN (in public subnet).
Created OVS bridge,
host:~#ovs-vsctl add-br br1
host:~#ovs-vsctl add-port eth1
host:~#ovs-vsctl add-port br1 eth1
Created VM,
host:~#virt-install --connect qemu:///system --name vm1 --ram 2000 --vcpus 2
--disk /var/lib/libvirt/images/vm1.img --cdrom
/var/lib/libvirt/ubuntu-12.04.3-server-amd64.iso --graphics vnc --virt-type kvm
--bridge br1
host:~#ovs-vsctl show
4d79704f-06ec-41cb-a8dd-d38a82e7ad17
Bridge "br1"
Port "br1"
Interface "br1"
type: internal
Port "eth1"
Interface "eth1"
host:~# ovs-vsctl list-ports br1
eth1
Right now I have the following interfaces,
br1,eth0,eth1,lo,ovs-system,virbr0,vnet0 etc
host:~# lsmod | grep br
bridge 90989 0
stp 12976 1 bridge
root@supathal-2:~# lsmod | grep open
openvswitch 66857 0
(Noob) Questions,
1. I was hoping to see vnet0 (I guess this is vnic of VM) as a port in br1
above. Does it require extra steps?
2. Was wondering
* if I could bind eth1 to virbr0 (no ip address on eth1 instead apply ip
address to virbr0)
* attach virbr0 to br1 (OVS) and configure iptables
Thanks in advance,
_______________________________________________
discuss mailing list
[email protected]
http://openvswitch.org/mailman/listinfo/discuss