Just a guess, but probably need to clear the crud from the build directory.
cd gnuradio/build (or wherever you have the source)
sudo rm -rf *
*** Danger Will Robinson !!! *** Make absolutely sure you're in the correct directory before issuing that command.
Also, it's better to do three steps.
cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Release --DPYTHON_EXECUTABLE=/usr/bin/python3 ../ > build.log 2>&1
make -j4
sudo make install
That way, you don't have files with root ownership in the build directory.
Ron
On 10/8/24 05:08, Chris Gorman wrote:
Hi Jim, Your call on what to do about this. If it were me, I'd probably try what Volker is suggesting and use the prebuilt binary. That said, if you want to try to get gnuradio built on your pi, I'll try to help. Unfortunately, I'm kind of confused about your results. You should have more than just python-support and libad9361 if all the dependencies were installed.If you want to continue. Run the following and attach the build.log file produced to your next email. (It's the build command followed by stdio and stderr redirection to a file.) cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Release --DPYTHON_EXECUTABLE=/usr/bin/python3 ../ > build.log 2>&1 I'll take a look at the results and compare to what I'm getting on my x86 machine. All the best, Chris On Tue, Oct 8, 2024 at 5:20 AM Volker Schroer <dl1...@gmx.de> wrote:https://wiki.gnuradio.org/index.php?title=InstallingGR says: For Raspberry Pi OS64-bit ≥2021-10-30 the actual version of gnuradio is v3.10.5.1. Why can't you use this?Chris, I did what you suggested. I then ran cmake as before. The result was the same except that the following were added to the gnuradio enabled components: python-support libad9361 I'm considering giving up on this. I'm consuming a lot of your time and this is a personal project only. I really appreciate the effort you have put into this. I wanted to upgrade in order to add a component to my project that requires 3.10. I wouldn't be upset if you want to pull the plug on this. Jim -----Original Message----- From: Chris Gorman Sent: Monday, October 7, 2024 9:22 AM To: Barry Jackson Cc: discuss-gnuradio@gnu.org Subject: Re: New install of GNU Radio executes old version Hello Jim, As Barry said you're missing lots of devel packages. I assume based on your python version that you're using Raspbian Bullseye as your OS. If that's the case, there is a list of packages that you'll need to install to build gnuradio. I would try the list of packages recommended on https://wiki.gnuradio.org/index.php?title=UbuntuInstall . Basically, sudo apt install git cmake g++ libboost-all-dev libgmp-dev python3-numpy \ python3-mako python3-sphinx python3-lxml doxygen libfftw3-dev \ libsdl1.2-dev libgsl-dev libqwt-qt5-dev libqt5opengl5-dev python3-pyqt5 \ liblog4cpp5-dev libzmq3-dev python3-yaml python3-click python3-click- plugins \ python3-zmq python3-scipy python3-gi python3-gi-cairo gir1.2-gtk-3.0 \ libcodec2-dev libgsm1-dev libusb-1.0-0 libusb-1.0-0-dev libudev-dev python3-setuptools sudo apt install pybind11-dev python3-matplotlib libsndfile1-dev \ libsoapysdr-dev soapysdr-tools python3-pygccxml python3-pyqtgraph and sudo apt install libiio-dev libad9361-dev libspdlog-dev python3-packaging python3-jsonschema python3-qtpy Once you get those installed, you'll need to rebuild gnuradio. You're looking for a list of gnuradio enabled components after running cmake similar to the one I sent you. Hope this helps. Chris On Mon, Oct 7, 2024 at 4:21 AM Barry Jackson <zen25...@zen.co.uk> wrote:On 07/10/2024 01:11, Elmore Family wrote:Chris, Here is what I have after cmake: -- ###################################################### -- # Gnuradio enabled components -- ###################################################### -- * testing-support -- * post-install -- * doxygen -- * man-pagesYou are missing lots of -devel packages for all those disabled missing components. As a guide look at the BuildRequires in our (Mageia) gnuradio.spec they start at line 75: http://svnweb.mageia.org/packages/cauldron/gnuradio/current/SPECS/ gnuradio.spec?revision=2102453&view=markup
