Hi Jim, The --DPYTHON_EXECUATBLE=/usr with the extra switch is a typo on my part, it should be -DPYTHON_EXECUTABLE=/usr . Sorry. You should get an error from cmake with the second switch.
Can you send the error and log file and I'll have a look. Hoping your nightmare ends soon. :) Chris On Tue, Oct 8, 2024 at 4:28 PM Elmore Family <wa4...@comcast.net> wrote: > > Chris, et al, > > The install failed with 2 errors at qtgui. > > This is a nightmare. > > Jim > > -----Original Message----- > From: Chris Gorman > Sent: Tuesday, October 8, 2024 8:08 AM > To: Volker Schroer > Cc: discuss-gnuradio@gnu.org > Subject: Re: New install of GNU Radio executes old version > > Hi Jim, > > Your call on what to do about this. If it were me, I'd probably try > what Volker is suggesting and use the prebuilt binary. That said, if > you want to try to get gnuradio built on your pi, I'll try to help. > Unfortunately, I'm kind of confused about your results. You should > have more than just python-support and libad9361 if all the > dependencies were installed. > > If you want to continue. Run the following and attach the build.log > file produced to your next email. (It's the build command followed by > stdio and stderr redirection to a file.) > > cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Release > --DPYTHON_EXECUTABLE=/usr/bin/python3 ../ > build.log 2>&1 > > I'll take a look at the results and compare to what I'm getting on my > x86 machine. > > All the best, > > Chris > > On Tue, Oct 8, 2024 at 5:20 AM Volker Schroer <dl1...@gmx.de> wrote: > > > > https://wiki.gnuradio.org/index.php?title=InstallingGR > > says: > > For Raspberry Pi OS64-bit ≥2021-10-30 the actual version of gnuradio is > > v3.10.5.1. > > > > Why can't you use this? > > > Chris, > > > > > > I did what you suggested. > > > > > > I then ran cmake as before. The result was the same except that the > > > following were added to the gnuradio enabled components: > > > > > > python-support > > > libad9361 > > > > > > I'm considering giving up on this. I'm consuming a lot of your time and > > > this is a personal project only. I really appreciate the effort you have > > > put into this. > > > > > > I wanted to upgrade in order to add a component to my project that > > > requires 3.10. > > > > > > I wouldn't be upset if you want to pull the plug on this. > > > > > > Jim > > > > > > -----Original Message----- From: Chris Gorman > > > Sent: Monday, October 7, 2024 9:22 AM > > > To: Barry Jackson > > > Cc: discuss-gnuradio@gnu.org > > > Subject: Re: New install of GNU Radio executes old version > > > > > > Hello Jim, > > > > > > As Barry said you're missing lots of devel packages. I assume based > > > on your python version that you're using Raspbian Bullseye as your OS. > > > If that's the case, there is a list of packages that you'll need to > > > install to build gnuradio. I would try the list of packages > > > recommended on https://wiki.gnuradio.org/index.php?title=UbuntuInstall > > > . > > > > > > Basically, > > > > > > sudo apt install git cmake g++ libboost-all-dev libgmp-dev python3-numpy > > > \ > > > python3-mako python3-sphinx python3-lxml doxygen libfftw3-dev \ > > > libsdl1.2-dev libgsl-dev libqwt-qt5-dev libqt5opengl5-dev python3-pyqt5 > > > \ > > > liblog4cpp5-dev libzmq3-dev python3-yaml python3-click python3-click- > > > plugins \ > > > python3-zmq python3-scipy python3-gi python3-gi-cairo gir1.2-gtk-3.0 \ > > > libcodec2-dev libgsm1-dev libusb-1.0-0 libusb-1.0-0-dev libudev-dev > > > python3-setuptools > > > > > > sudo apt install pybind11-dev python3-matplotlib libsndfile1-dev \ > > > libsoapysdr-dev soapysdr-tools python3-pygccxml python3-pyqtgraph > > > > > > and > > > > > > sudo apt install libiio-dev libad9361-dev libspdlog-dev > > > python3-packaging python3-jsonschema python3-qtpy > > > > > > Once you get those installed, you'll need to rebuild gnuradio. You're > > > looking for a list of gnuradio enabled components after running cmake > > > similar to the one I sent you. > > > > > > Hope this helps. > > > > > > Chris > > > > > > On Mon, Oct 7, 2024 at 4:21 AM Barry Jackson <zen25...@zen.co.uk> wrote: > > >> > > >> On 07/10/2024 01:11, Elmore Family wrote: > > >> > Chris, > > >> > > > >> > Here is what I have after cmake: > > >> > > > >> > -- ###################################################### > > >> > -- # Gnuradio enabled components > > >> > -- ###################################################### > > >> > -- * testing-support > > >> > -- * post-install > > >> > -- * doxygen > > >> > -- * man-pages > > >> > > >> You are missing lots of -devel packages for all those disabled missing > > >> components. > > >> > > >> As a guide look at the BuildRequires in our (Mageia) gnuradio.spec they > > >> start at line 75: > > >> > > >> http://svnweb.mageia.org/packages/cauldron/gnuradio/current/SPECS/ > > >> gnuradio.spec?revision=2102453&view=markup > > >> > > >> > > >> > > >> > > >> > > >> > > > > > > > > > > > > > -- > This email has been checked for viruses by AVG antivirus software. > www.avg.com >
