Hi Marcus. Thanks, yes that seems to be bearing itself out so far. I'm fairly certain that if I can get the code that "came along for the ride" installed, then I'll be set.
So the issue is still why the makefiles don't detect usb.h and libusb even though they're installed. Is there a trick I need to use to let the configure script know that it's there? thanks. On Apr 27, 2014, at 7:18 PM, Marcus D. Leech <mle...@ripnet.com> wrote: > On 04/27/2014 10:14 PM, Michael Carter wrote: >> Thanks Marcus. >> This is for OpenBTS 2.8, which based on the myriad lists I've been >> researching, is a "pre-UHD application". >> >> Anyone have any insight the issue? >> >> Thanks, >> #mikec > OpenBTS doesn't actually use Gnu Radio, just some of the driver code for > USRP1 that "came along for the ride" with early Gnu Radio > releases. > > Getting that code to build on a newer Linux distrib may be a challenge. > > >> On Apr 27, 2014, at 4:00 PM, Marcus D. Leech <mle...@ripnet.com> wrote: >> >>> On 04/27/2014 06:56 PM, Michael Carter wrote: >>>> >>>> Hello all, >>>> >>>> I'm hoping someone can provide some insight to a build problem I'm seeing. >>>> I'm building 3.3.0 to use with an Ettus Research USRP1. >>>> I'm given to understand that I need to build 3.3.0 as that was the last >>>> release which is compatible with the usrp1. >>>> >>>> I've gone through the dependencies and have installed them. >>>> The priority for me is getting the usrp functionality and grc built. >>>> When I do a ./configure I get these results: >>>> >>> Unless you have a pre-UHD application that cannot be updated, there's no >>> reason to use this. The USRP1 is perfectly functional with >>> "modern" Gnu Radios that use UHD as the interface. >>> >>> >>>> ----- >>>> The following GNU Radio components have been successfully configured: >>>> >>>> config >>>> gruel >>>> gnuradio-core >>>> gr-msdd6000 >>>> gr-audio-jack >>>> gr-audio-osx >>>> gr-audio-portaudio >>>> gr-atsc >>>> gr-cvsd-vocoder >>>> gr-gsm-fr-vocoder >>>> gr-noaa >>>> gr-pager >>>> gr-radio-astronomy >>>> gr-trellis >>>> gr-video-sdl >>>> gnuradio-examples >>>> docs >>>> >>>> You my now run the make command to build these components. >>>> >>>> ********************************************************************* >>>> The following components were skipped either because you asked not >>>> to build them or they didn't pass configuration checks: >>>> >>>> gcell >>>> usrp >>>> usrp2 >>>> gr-usrp >>>> gr-usrp2 >>>> gr-gcell >>>> gr-audio-alsa >>>> gr-audio-oss >>>> gr-audio-windows >>>> gr-comedi >>>> gr-gpio >>>> gr-radar-mono >>>> gr-wxgui >>>> gr-qtgui >>>> gr-sounder >>>> gr-utils >>>> grc >>>> >>>> These components will not be built. >>>> ----- >>>> >>>> In the build log, I see that usb.h is not found/usable (line 337 in the >>>> pastebin listed later): >>>> >>>> checking for usb.h... no >>>> USRP requires libusb header 'usb.h' which was not found or was not >>>> usable. See http://www.libusb.org >>>> Unable to find dependency libusb. >>>> >>>> Libusb was installed when I installed uhd-devel @3.7.1 via port. >>>> I've also built and installed from libusb.org's 1.0 source. >>>> >>>> port installed | grep usb >>>> libusb @1.0.18_0 (active) >>>> uhd-devel @3.7.0_20140325_0+docs+examples+libusb+manual+orc+python27+test >>>> uhd-devel >>>> @3.7.1_20140421_0+docs+examples+libusb+manual+orc+python27+test (active) >>>> >>>> mikec-macbook-pro:gnuradio-3.3.0 mikec$ cd /usr/local/include/ >>>> mikec-macbook-pro:include mikec$ ls -l usb* >>>> -rw-rw-r--+ 1 root wheel 8360 Sep 10 2009 usb.h >>>> -rw-rw-r--+ 1 root wheel 24428 Sep 10 2009 usbpp.h >>>> mikec-macbook-pro:include mikec$ cd ../lib >>>> mikec-macbook-pro:lib mikec$ ls -l libusb* >>>> -rwxrwxr-x+ 1 root wheel 140248 Sep 10 2009 libusb-0.1.4.dylib >>>> -rwxr-xr-x 1 root wheel 103760 Apr 27 14:59 libusb-1.0.0.dylib >>>> -rw-r--r-- 1 root wheel 366200 Apr 27 14:59 libusb-1.0.a >>>> lrwxr-xr-x 1 root wheel 18 Apr 27 14:59 libusb-1.0.dylib -> >>>> libusb-1.0.0.dylib >>>> -rwxr-xr-x 1 root wheel 935 Apr 27 14:59 libusb-1.0.la >>>> -rw-rw-r--+ 1 root wheel 167156 Sep 10 2009 libusb.a >>>> -rwxrwxr-x+ 1 root wheel 914 Sep 10 2009 libusb.la >>>> -rwxrwxr-x+ 1 root wheel 270248 Sep 10 2009 libusbpp-0.1.4.dylib >>>> -rw-rw-r--+ 1 root wheel 340380 Sep 10 2009 libusbpp.a >>>> -rwxrwxr-x+ 1 root wheel 951 Sep 10 2009 libusbpp.la >>>> >>>> Generally, /usr/local/include and /usr/local/lib are default locations, >>>> but i've even set LDFLAGS="-L/usr/local/lib" and >>>> CPPFLAGS="-I/usr/local/include" just in case. >>>> I still get the same results. >>>> >>>> Any input would be appreciated. >>>> The entire build log is on pastebin at: http://pastebin.com/FubyMRAt >>>> >>>> Thanks! >>>> >>>> >>>> >>>> _______________________________________________ >>>> Discuss-gnuradio mailing list >>>> Discuss-gnuradio@gnu.org >>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >>> -- >>> Marcus Leech >>> Principal Investigator >>> Shirleys Bay Radio Astronomy Consortium >>> http://www.sbrac.org >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
