Thanks Marcus. This is for OpenBTS 2.8, which based on the myriad lists I've been researching, is a "pre-UHD application".
Anyone have any insight the issue? Thanks, #mikec On Apr 27, 2014, at 4:00 PM, Marcus D. Leech <mle...@ripnet.com> wrote: > On 04/27/2014 06:56 PM, Michael Carter wrote: >> >> Hello all, >> >> I'm hoping someone can provide some insight to a build problem I'm seeing. >> I'm building 3.3.0 to use with an Ettus Research USRP1. >> I'm given to understand that I need to build 3.3.0 as that was the last >> release which is compatible with the usrp1. >> >> I've gone through the dependencies and have installed them. >> The priority for me is getting the usrp functionality and grc built. >> When I do a ./configure I get these results: >> > Unless you have a pre-UHD application that cannot be updated, there's no > reason to use this. The USRP1 is perfectly functional with > "modern" Gnu Radios that use UHD as the interface. > > >> ----- >> The following GNU Radio components have been successfully configured: >> >> config >> gruel >> gnuradio-core >> gr-msdd6000 >> gr-audio-jack >> gr-audio-osx >> gr-audio-portaudio >> gr-atsc >> gr-cvsd-vocoder >> gr-gsm-fr-vocoder >> gr-noaa >> gr-pager >> gr-radio-astronomy >> gr-trellis >> gr-video-sdl >> gnuradio-examples >> docs >> >> You my now run the make command to build these components. >> >> ********************************************************************* >> The following components were skipped either because you asked not >> to build them or they didn't pass configuration checks: >> >> gcell >> usrp >> usrp2 >> gr-usrp >> gr-usrp2 >> gr-gcell >> gr-audio-alsa >> gr-audio-oss >> gr-audio-windows >> gr-comedi >> gr-gpio >> gr-radar-mono >> gr-wxgui >> gr-qtgui >> gr-sounder >> gr-utils >> grc >> >> These components will not be built. >> ----- >> >> In the build log, I see that usb.h is not found/usable (line 337 in the >> pastebin listed later): >> >> checking for usb.h... no >> USRP requires libusb header 'usb.h' which was not found or was not >> usable. See http://www.libusb.org >> Unable to find dependency libusb. >> >> Libusb was installed when I installed uhd-devel @3.7.1 via port. >> I've also built and installed from libusb.org's 1.0 source. >> >> port installed | grep usb >> libusb @1.0.18_0 (active) >> uhd-devel @3.7.0_20140325_0+docs+examples+libusb+manual+orc+python27+test >> uhd-devel @3.7.1_20140421_0+docs+examples+libusb+manual+orc+python27+test >> (active) >> >> mikec-macbook-pro:gnuradio-3.3.0 mikec$ cd /usr/local/include/ >> mikec-macbook-pro:include mikec$ ls -l usb* >> -rw-rw-r--+ 1 root wheel 8360 Sep 10 2009 usb.h >> -rw-rw-r--+ 1 root wheel 24428 Sep 10 2009 usbpp.h >> mikec-macbook-pro:include mikec$ cd ../lib >> mikec-macbook-pro:lib mikec$ ls -l libusb* >> -rwxrwxr-x+ 1 root wheel 140248 Sep 10 2009 libusb-0.1.4.dylib >> -rwxr-xr-x 1 root wheel 103760 Apr 27 14:59 libusb-1.0.0.dylib >> -rw-r--r-- 1 root wheel 366200 Apr 27 14:59 libusb-1.0.a >> lrwxr-xr-x 1 root wheel 18 Apr 27 14:59 libusb-1.0.dylib -> >> libusb-1.0.0.dylib >> -rwxr-xr-x 1 root wheel 935 Apr 27 14:59 libusb-1.0.la >> -rw-rw-r--+ 1 root wheel 167156 Sep 10 2009 libusb.a >> -rwxrwxr-x+ 1 root wheel 914 Sep 10 2009 libusb.la >> -rwxrwxr-x+ 1 root wheel 270248 Sep 10 2009 libusbpp-0.1.4.dylib >> -rw-rw-r--+ 1 root wheel 340380 Sep 10 2009 libusbpp.a >> -rwxrwxr-x+ 1 root wheel 951 Sep 10 2009 libusbpp.la >> >> Generally, /usr/local/include and /usr/local/lib are default locations, but >> i've even set LDFLAGS="-L/usr/local/lib" and CPPFLAGS="-I/usr/local/include" >> just in case. >> I still get the same results. >> >> Any input would be appreciated. >> The entire build log is on pastebin at: http://pastebin.com/FubyMRAt >> >> Thanks! >> >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > -- > Marcus Leech > Principal Investigator > Shirleys Bay Radio Astronomy Consortium > http://www.sbrac.org > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
