On 04/27/2014 06:56 PM, Michael Carter wrote:
Hello all,
I'm hoping someone can provide some insight to a build problem I'm seeing.
I'm building 3.3.0 to use with an Ettus Research USRP1.
I'm given to understand that I need to build 3.3.0 as that was the last release
which is compatible with the usrp1.
I've gone through the dependencies and have installed them.
The priority for me is getting the usrp functionality and grc built.
When I do a ./configure I get these results:
Unless you have a pre-UHD application that cannot be updated, there's no
reason to use this. The USRP1 is perfectly functional with
"modern" Gnu Radios that use UHD as the interface.
-----
The following GNU Radio components have been successfully configured:
config
gruel
gnuradio-core
gr-msdd6000
gr-audio-jack
gr-audio-osx
gr-audio-portaudio
gr-atsc
gr-cvsd-vocoder
gr-gsm-fr-vocoder
gr-noaa
gr-pager
gr-radio-astronomy
gr-trellis
gr-video-sdl
gnuradio-examples
docs
You my now run the make command to build these components.
*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:
gcell
usrp
usrp2
gr-usrp
gr-usrp2
gr-gcell
gr-audio-alsa
gr-audio-oss
gr-audio-windows
gr-comedi
gr-gpio
gr-radar-mono
gr-wxgui
gr-qtgui
gr-sounder
gr-utils
grc
These components will not be built.
-----
In the build log, I see that usb.h is not found/usable (line 337 in the
pastebin listed later):
checking for usb.h... no
USRP requires libusb header 'usb.h' which was not found or was not usable.
See http://www.libusb.org
Unable to find dependency libusb.
Libusb was installed when I installed uhd-devel @3.7.1 via port.
I've also built and installed from libusb.org's 1.0 source.
port installed | grep usb
libusb @1.0.18_0 (active)
uhd-devel @3.7.0_20140325_0+docs+examples+libusb+manual+orc+python27+test
uhd-devel @3.7.1_20140421_0+docs+examples+libusb+manual+orc+python27+test
(active)
mikec-macbook-pro:gnuradio-3.3.0 mikec$ cd /usr/local/include/
mikec-macbook-pro:include mikec$ ls -l usb*
-rw-rw-r--+ 1 root wheel 8360 Sep 10 2009 usb.h
-rw-rw-r--+ 1 root wheel 24428 Sep 10 2009 usbpp.h
mikec-macbook-pro:include mikec$ cd ../lib
mikec-macbook-pro:lib mikec$ ls -l libusb*
-rwxrwxr-x+ 1 root wheel 140248 Sep 10 2009 libusb-0.1.4.dylib
-rwxr-xr-x 1 root wheel 103760 Apr 27 14:59 libusb-1.0.0.dylib
-rw-r--r-- 1 root wheel 366200 Apr 27 14:59 libusb-1.0.a
lrwxr-xr-x 1 root wheel 18 Apr 27 14:59 libusb-1.0.dylib ->
libusb-1.0.0.dylib
-rwxr-xr-x 1 root wheel 935 Apr 27 14:59 libusb-1.0.la
-rw-rw-r--+ 1 root wheel 167156 Sep 10 2009 libusb.a
-rwxrwxr-x+ 1 root wheel 914 Sep 10 2009 libusb.la
-rwxrwxr-x+ 1 root wheel 270248 Sep 10 2009 libusbpp-0.1.4.dylib
-rw-rw-r--+ 1 root wheel 340380 Sep 10 2009 libusbpp.a
-rwxrwxr-x+ 1 root wheel 951 Sep 10 2009 libusbpp.la
Generally, /usr/local/include and /usr/local/lib are default locations, but i've even set
LDFLAGS="-L/usr/local/lib" and CPPFLAGS="-I/usr/local/include" just in case.
I still get the same results.
Any input would be appreciated.
The entire build log is on pastebin at: http://pastebin.com/FubyMRAt
Thanks!
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
