-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Mike,
it would be really helpful if you posted the error message. If it is more than a few lines, pastebin'ing would be good. Also can you tell on which branch you're on? I'm worried about missing '.dat' because they shouldn't be there. I thought I removed all references to them a while ago. Happy hacking Johannes On 19.12.2013 17:14, Mike Cornelius wrote: > Hi Johannes and all, > > I just pulled a new copy and make test still fails for me with > various missing .dat files. Can anyone else confirm that make test > is working ok for them with the latest version? > > Mike > > > > On 20 December 2013 03:11, Johannes Demel <uf...@student.kit.edu > <mailto:uf...@student.kit.edu>> wrote: > > Hi Mike, > > just saw this mail. Basically this means that you're using an old > version. Newer versions don't use these files any more. I > recommend updating your gr-lte version. It runs on GR 3.7 now, so > you don't have to worry about an old version there and I put in all > the bugfixes into the latest master branch. Besides that, which > version do you use exactly? > > Happy hacking Johannes > > On 18.12.2013 23:59, Mike Cornelius wrote: >> Hi Johannes, >> >> Further to my last email I just noticed that the tests that are > failing >> are failing because test vectors are not available eg >> '/home/johannes/tests/descramble.dat'. >> >> Mike >> >> >> On 19 December 2013 18:54, Mike Cornelius <d...@drelectro.com > <mailto:d...@drelectro.com> >> <mailto:d...@drelectro.com <mailto:d...@drelectro.com>>> wrote: >> >> Hi Johannes, >> >> With regard to my earlier message regarding the crash I'm > seeing, I >> note that a few tests fail when I run make test, is that to be > expected? >> Also do you think it would be possible to publish the reference >> waveform that you are using ? That way I could check to see if >> the crash occurs with your known 'good' waveform too. >> >> Mike >> >> >> On 19 December 2013 18:37, Mike Cornelius <d...@drelectro.com > <mailto:d...@drelectro.com> >> <mailto:d...@drelectro.com <mailto:d...@drelectro.com>>> wrote: >> >> Hi Ralph, >> >> I had the same problem at first myself, there is no need to >> reconnect anything in the top_level.grc block so long as > all the >> hier blocks have actually been compiled. In my case the biggest >> problem was the LTE_estimator_hier > block >> would not compile because the 'import lte' failed (see earlier >> messages in this thread for details). >> >> >> Mike >> >> >> On 19 December 2013 18:27, Johannes Demel > <uf...@student.kit.edu <mailto:uf...@student.kit.edu> >> <mailto:uf...@student.kit.edu > <mailto:uf...@student.kit.edu>>> wrote: >> >> Hi everybody, >> >> I added screenshots for all the hierarchical > flowgraphs and >> the top flowgraph to the docs directory. I hope this helps to > build >> the whole LTE flowgraph in GRC. Although, I realized that would >> be very helpful if the hierarchical flowgraphs would be compiled >> with grcc during make and > then >> installed. Preferably added to a CMakeLists file. I will look > into this. >> >> Happy hacking Johannes >> >> On 18.12.2013 09:47, Johannes Demel wrote: >>> Hi Ralph, >>> >>> unfortunately there are no screenshots yet. I guess > it is >> a good idea to >>> add some. After the estimator, there should be 2 blocks: >> Decode PBCH and >>> Decode PCFICH. They take the same stream. and work in >> parallel. Then >>> after Decode PBCH there is supposed to be a 'Decode BCH' >> block. These >>> blocks may need some time to generate because they > consist >> of hier >>> blocks. That's kind of the tribute that has to be > paid for >> a clean >>> flowgraph. If you opened a flowgraph with missing blocks, as > far as I >> know, to make >>> the missing blocks appear you have to close and > reopen at >> least this >>> particular flowgraph. >>> >>> Happy hacking Johannes >>> >>> >>> On Wed, Dec 18, 2013 at 3:49 AM, Ralph A. Schmid, dk5ras >>> <ra...@schmid.xxx <mailto:ra...@schmid.xxx > <mailto:ra...@schmid.xxx> >> <mailto:ra...@schmid.xxx <mailto:ra...@schmid.xxx>>>> > wrote: >>> >>> Hi, >>> >>> after opening and generating the hier blocks > still the >> top_level.grc >>> has missing blocks, at least LTE estimator > outputs and >> unpack MIB >>> inputs are unconnected, leaving a large white > area in >> between. How >>> should this flowgraph look like, is there a > screenshot >> available >>> somewhere? >>> >>> Just wanted to put this all together in my lunch >> break, but seems >>> too big for such a short break anyway :) >>> >>> Ralph. >>> >>> >>>> -----Original Message----- From: >> discuss-gnuradio-bounces+ralph=schmid....@gnu.org > <mailto:schmid....@gnu.org> >> <mailto:schmid....@gnu.org <mailto:schmid....@gnu.org>> >>> <mailto:schmid....@gnu.org > <mailto:schmid....@gnu.org> >> <mailto:schmid....@gnu.org <mailto:schmid....@gnu.org>>> >> [mailto:discuss-gnuradio-bounces+ralph > <mailto:discuss-gnuradio-bounces%2Bralph> >> <mailto:discuss-gnuradio-bounces%2Bralph > <mailto:discuss-gnuradio-bounces%252Bralph>> >>> <mailto:discuss-gnuradio-bounces%2Bralph > <mailto:discuss-gnuradio-bounces%252Bralph> >> <mailto:discuss-gnuradio-bounces%252Bralph > <mailto:discuss-gnuradio-bounces%25252Bralph>>>=schmid....@gnu.org > <mailto:schmid....@gnu.org> >> <mailto:schmid....@gnu.org <mailto:schmid....@gnu.org>> >>> <mailto:schmid....@gnu.org > <mailto:schmid....@gnu.org> >> <mailto:schmid....@gnu.org > <mailto:schmid....@gnu.org>>>] On Behalf Of >>>> Johannes Demel Sent: Sunday, 15 December, 2013 00:34 To: >>>> discuss-gnuradio Subject: [Discuss-gnuradio] gr-lte updated >>>> to GNU >> Radio 3.7 API >>>> >>>> Hello GNU Radio enthusiasts, >>>> >>>> some time after the GNU Radio 3.7 release I > started >> to move the >>> code for 'gr-lte' to the new API. Besides moving > it to >> the new API, I >>>> wanted to clean up code and rework a lot of tests. >> Thus, the whole >>> transition took a lot of time and work. >>>> Now, all current blocks are moved to the GNU Radio >> 3.7 API with >>> lots of enhancements. e.g. I tried to remove all >> hierarchical python >>> blocks >>>> and created them as GRC hier blocks instead. Or >> runtime status >>> events, like cell_id extraction, are all propagated >> through message >>> ports >>>> now. Also, there is a PyBOMBS recipe now to ease the >> installation process. >>>> >>>> I hope 'gr-lte' can be useful for others. >>>> >>>> Source code is available at >> https://github.com/kit-cel/gr-lte >>>> >>>> Happy hacking Johannes >>>> >>>> _______________________________________________ >>>> Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>> >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>>> >>>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>> >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> >> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>>> >>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> >> _______________________________________________ Discuss-gnuradio >> mailing list Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org> <mailto:Discuss-gnuradio@gnu.org > <mailto:Discuss-gnuradio@gnu.org>> >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> >> >> > > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJSs/aHAAoJEO7fmkDsqywM6qQP/1RdGsoM8NQZ2BGAsQZ5Ic9z wd0x5BFKy9fezWMN281ge3A/sV7c0lAKxaw7pjKPkkxANqew8LPrM5DreUTd+S8C jYccRdsZAdGm0l0Ytf9uaIEGqD3eYSqxbs6lwrezBix+5OEiYHToh3k7RaPaxzga aLMWDpkK+x7pNmoS3hEdTi5i7LlI+eGCQIJOC6S2vpaj9pgOMm9ZTj8/984+t4Ml WQW1QP+drrB4uEO8wGhmtR97CMCayj6n5S3e/TnTqQzbL7YxfLTNq4Tgvc1qGrkr HLhpK71qeiUoR6eJ89zjD8SSPVfBDky+9Lvjn0pOCYBW1rxYCTpZWZiGvO6HZ7tT 4otMvBfWp/wBgfbCf+G8ESZRRC8WW6OldpDSrVfKzaO/EUFBH5wqD3pf/U+lTdXR 4+dTuBdFEzY8DQHDoBGaZ07++RIzSzcca5zYiH3x1GzbLeaLJxfsLyz8FJw3xKQM 6WeypOGc46dqKq7mJhQTk0XUw/0QVkiw9nick7uzoAQhwPCNL7PVTNeL5aDtqO2j FsEd2Nq0lhcBr3QWIkrmJQEP1uawb1hNL9gHDXGxKn8O3jsh+vg7/6X0dWkUKTiA RX5TjyZLv+tUt9EGuuf/TV0nN5vDtP4lmpvCRLRgTGNYTAZoaGC+jnbHwJ5PGG6I 6xmZbNnGvUHxR6XW5PWU =9517 -----END PGP SIGNATURE----- _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
