---------- Forwarded message ----------
From: Karan Talasila <karan....@gmail.com>
Date: Sat, Jun 29, 2013 at 6:44 PM
Subject: Re: [Discuss-gnuradio] Problem in uhd_fft
To: "j...@joshknows.com" <j...@joshknows.com>


Hi Josh,
            I am using USRP 1.   I am using a sma-bulkhead cable from Tx_A
of basic tx daughter board and similarly a sma-bulkhead cable from Rx_A
terminal of the Basic Rx daughter board. and then i am connecting a sma-sma
cable from usrp transmitter to a coupler on powerline cable. Similarly I am
connecting a sma-sma cable from usrp receiver to another coupler on the
powerline cable.

so in all I am using 2 usrp 1, 2 sma-sma cables, 2 sma-bulkhead cable and
two couplers. Please let me know if i am not clear with the description.
Thank you.


On Sat, Jun 29, 2013 at 11:24 AM, Josh Blum <j...@joshknows.com> wrote:

>
>
> On 06/27/2013 09:44 AM, Karan Talasila wrote:
> > Hi,
> >       I am using a basic tx and basic rx daughterboard for transmission
> and
> > reception. The spec says basic tx and basic rx run from 0 to 250 MHz. But
> > when i run transmitter and check the uhd_fft at receiver, after 32 Mhz,
> > there is no signal. If i set the transmitter frequency in my flowgraph as
> > 33 MHz, I don't get a signal at 33 Mhz, But when i enter frequency as
> > -31Mhz in the uhd_fft i get a received signal on my fft. why does this
> > happen? If it's in the range of daughter board it should be receiving it
> at
> > that particular frequency right.
> >
> >
>
> Can you tell me more about the cabling setup? Which ports of the Basic
> TX and RX are you using, and how are they connected via SMA cable?
>
> -josh
>
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > Discuss-gnuradio@gnu.org
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>



-- 
Regards
Karan Talasila



-- 
Regards
Karan Talasila
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to