On Sun, Oct 24, 2010 at 10:48 AM, Achilleas Anastasopoulos <anas...@umich.edu> wrote: > I am trying a new build from the source tree on fedora 12. > Configure gives the result shown at the end of the email. > Make and make check complete fine, but sudo make install > completes with the message: > *** Post-Install Message *** > Warning: python could not find the gnuradio module. > Make sure that /usr/local/lib64/python2.6/site-packages is in your PYTHONPATH > > make[3]: Leaving directory `/home/anastas/gnuradio_trunk' > make[2]: Leaving directory `/home/anastas/gnuradio_trunk' > make[1]: Leaving directory `/home/anastas/gnuradio_trunk > > I know the PYTHONPATH is set appropriately, since I can import gnuradio > from within python...
If you can import gnuradio, can you also run GNU Radio applications? This might be a misunderstanding during the install but not an actual problem. Tom > Also grc is not installed in /usr/local/bin > > Any ideas, > Achilleas > > > > > '********************************************************************* > The following components were skipped either because you asked not > to build them or they didn't pass configuration checks: > > usrp2-firmware > > These components will not be built. > > > ********************************************************************* > The following GNU Radio components have been successfully configured: > > config > gruel > gnuradio-core > usrp > usrp2 > gr-usrp > gr-usrp2 > gr-msdd6000 > gr-audio-alsa > gr-audio-oss > gr-atsc > gr-cvsd-vocoder > gr-gpio > gr-gsm-fr-vocoder > gr-noaa > gr-pager > gr-radar-mono > gr-radio-astronomy > gr-trellis > gr-video-sdl > gr-wxgui > gr-qtgui > gr-sounder > gr-utils > gnuradio-examples > grc > docs > > You my now run the make command to build these components. > > ********************************************************************* > The following components were skipped either because you asked not > to build them or they didn't pass configuration checks: > > gcell > gr-gcell > gr-audio-jack > gr-audio-osx > gr-audio-portaudio > gr-audio-windows > gr-comedi > > These components will not be built. > > Configured GNU Radio release v3.3.1git-92-gdd74b98a for build. > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
