I am trying a new build from the source tree on fedora 12. Configure gives the result shown at the end of the email. Make and make check complete fine, but sudo make install completes with the message: *** Post-Install Message *** Warning: python could not find the gnuradio module. Make sure that /usr/local/lib64/python2.6/site-packages is in your PYTHONPATH
make[3]: Leaving directory `/home/anastas/gnuradio_trunk' make[2]: Leaving directory `/home/anastas/gnuradio_trunk' make[1]: Leaving directory `/home/anastas/gnuradio_trunk I know the PYTHONPATH is set appropriately, since I can import gnuradio from within python... Also grc is not installed in /usr/local/bin Any ideas, Achilleas '********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: usrp2-firmware These components will not be built. ********************************************************************* The following GNU Radio components have been successfully configured: config gruel gnuradio-core usrp usrp2 gr-usrp gr-usrp2 gr-msdd6000 gr-audio-alsa gr-audio-oss gr-atsc gr-cvsd-vocoder gr-gpio gr-gsm-fr-vocoder gr-noaa gr-pager gr-radar-mono gr-radio-astronomy gr-trellis gr-video-sdl gr-wxgui gr-qtgui gr-sounder gr-utils gnuradio-examples grc docs You my now run the make command to build these components. ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: gcell gr-gcell gr-audio-jack gr-audio-osx gr-audio-portaudio gr-audio-windows gr-comedi These components will not be built. Configured GNU Radio release v3.3.1git-92-gdd74b98a for build. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
