Hi Christopher You are right, the VBox.log comes from a stuck session.
Both of my drivers are NTFS. The system drive (C:) is SSD, the second one (D:) is HDD. I have got an idea. I can install the Sailfish OS SDK on my portable drive (with the VirtualBox) and try to run it on my notebook (Win 8 Pro x64) and my PC (Win 7 Home Premuim x64). I can also try to run the emulator in Fedora 18 (installed on my portable drive) on my notebook to found out if there goes about a defect of hardware or software. (I am sorry for my English) I can not use my portable drive right now so I will send results as soon as possible. Thank you Michal > Date: Sat, 4 May 2013 22:05:48 +0200 > From: christopher.l...@thurweb.ch > To: michal.prevra...@hotmail.cz > CC: devel@lists.sailfishos.org > Subject: RE: [SailfishDevel] Sailfish OS Emulator and Windows 8 > > > Hi Michal > > I am happy to hear that you have found a solution that mostly works. > > Pure speculation here, but I wonder if we are dealing with some kind > of timeout? > > Is there any difference between your first and second drive (HDD vs > SSD, Filesystem?). I see your D: is NTFS. > > I guess that the VBox.log you attached was from a stuck session. > > I see that your VM seems to go through quite a few states in a short time: > > 00:00:03.242833 Changing the VM state from 'CREATING' to 'CREATED'. > 00:00:03.244292 Changing the VM state from 'CREATED' to 'LOADING'. > 00:00:03.776120 Changing the VM state from 'LOADING' to 'SUSPENDED'. > 00:00:03.776245 Changing the VM state from 'SUSPENDED' to 'RESUMING'. > 00:00:03.776365 Changing the VM state from 'RESUMING' to 'RUNNING'. > 00:00:06.960234 Changing the VM state from 'RUNNING' to 'SUSPENDING'. > 00:00:07.085259 Changing the VM state from 'SUSPENDING' to 'SUSPENDED'. > 00:13:00.108306 Changing the VM state from 'SUSPENDED' to 'POWERING_OFF'. > 00:13:00.109135 Changing the VM state from 'POWERING_OFF' to 'OFF'. > 00:13:00.113646 Changing the VM state from 'OFF' to 'DESTROYING'. > 00:13:00.217581 Changing the VM state from 'DESTROYING' to 'TERMINATED'. > > By comparison, mine (after running for a similar short time) has only > 00:00:01.217354 Changing the VM state from 'CREATING' to 'CREATED'. > 00:00:01.218570 Changing the VM state from 'CREATED' to 'POWERING_ON'. > 00:00:01.220252 Changing the VM state from 'POWERING_ON' to 'RUNNING'. > > Chris > > Zitat von "Michal Prevratil" <michal.prevra...@hotmail.cz>: > > > Hi Christopher > > > > The Mer SDK VM is doing fine, everything works ok, no freezes. > > > > I think I have not found anything unexpected in the VBox.log file, > > anyway it is attached. > > > > However, I have maybe found a solution. I have reinstalled the > > VirtualBox and the Sailfish SDK to my system drive (both of them > > were originally installed on my second drive). > > Now it seems like the emulator will not freeze immediatelly after > > booting anymore. The emulator still rarely freezes but it happens > > only after a long while (not right after booting). When I tried to > > rise up the emulator's RAM to 2 GB I had again the same problems > > described in the last email, so i reverted it back to 512 MB. > > > > Thank you > > Michal > > > >> Date: Fri, 3 May 2013 07:18:45 +0200 > >> From: christopher.l...@thurweb.ch > >> To: michal.prevra...@hotmail.cz > >> CC: devel@lists.sailfishos.org > >> Subject: Re: [SailfishDevel] Sailfish OS Emulator and Windows 8 > >> > >> Hi Michal > >> > >> By way of comparison, how is the SDK VM doing? As you have not > >> mentioned it yet, I guess it is working normally. > >> > >> Does the VBox.log file (on your host) give any clues? > >> > >> Grüsse > >> > >> Chris > >> > >> Zitat von "Michal Prevratil" <michal.prevra...@hotmail.cz>: > >> > >> > Hello, > >> > thank you for your replies. > >> > > >> > I am sure that i have enough RAM - 8 GB (but using just 2 GB in the > >> > emulator, also tried more and less than 2 GB). I am using VirtualBox > >> > 4.2.12. > >> > > >> > When I start the emulator from Qt Creator there are 3 different cases: > >> > > >> > a) Emulator works OK, able to ssh in it, able to move with the > >> > cursor in the emulator > >> > b) Emulator boots up but screen stays black (Host + H does not > >> > work), able to ssh in it, able to move with the cursor in the > >> > emulator on the black screen, does not happen very often > >> > c) Emulator boots up and freezes, screen is black (Host + H does not > >> > work), unable to ssh in it (able to found but unable to connect it), > >> > unable to move the cursor, after a while Qt Creator shows green > >> > emulator icon and says that the emulator is not running > >> > In one try the emulator also ran from case a) to case c). > >> > There is log from booting: > >> > > >> > [0.000000] tsc: Fast TSC calibration failed > >> > [2.922339] EXT3-fs (sda1): error: couldn't mount because of > >> > unsupported optional features (240) > >> > [2.954863] EXT2-fs (sda1): error: couldn't mount because of > >> > unsupported optional features (244) > >> > [4.791476] systemd[1]: > >> > [/lib/systemd/system/systemd-journal.service:22] Failed to parse > >> > capability bounding set, ignoring: CAP_SYS_ADMIN CAP_DAC_OVERRIDE > >> > CAP_SYS_PTRACE CAP_SYSLOG CAP_AUDIT_CONTROL CAP_CHOW > >> > CAP_DAC_READ_SEARCH CAP_FOWNER CAP_SETUPID CAP_SETGID > >> > systemd-fsck[46]: platform: clean, 20816/128000 files, > >> 227235/511999 blocks > >> > [8.884085] piix4_smbus 0000:00:07.0: SMBus base address > >> > uninitialized - upgrade BIOS or use force_addr=0xaddr > >> > > >> > I have not changed any VirtualBox settings except the emulator's RAM. > >> > > >> > Thank you > >> > Michal > >> > > >> > Date: Thu, 2 May 2013 06:56:28 +0300 > >> > From: jarko.vihri...@jollamobile.com > >> > To: devel@lists.sailfishos.org > >> > Subject: Re: [SailfishDevel] Sailfish OS Emulator and Windows 8 > >> > > >> > > >> > > >> > > >> > > >> > > >> > Hello, > >> > > >> > We don't officially support Windows8 on the alpha SDK but it's in > >> > the works. In general the Emulator VM depends on the > >> > characteristics of the VirtualBox setup on the host. Do you have > >> > enough RAM, do you have VirtualBox 4.2 or newer (I think we > >> > officially support 4.1 onwards tho). > >> > > >> > > >> > > >> > When the emulator freezes, can you still ssh into it (i.e. using > >> > cygwin or equivalent : ssh -i ~/.ssh/mer-qt-creator-rsa -p 2223 > >> > root@localhost) ? > >> > > >> > > >> > > >> > thanks, Jarko > >> > > >> > > >> > > >> > On 05/01/2013 09:50 PM, Michal Prevratil wrote: > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > Hi, > >> > > >> > I would like to ask if anybody got to work Sailfish SDK > >> > with Windows 8? I am asking because of my problems with > >> > emulator. After booting up it seems like freezed (tried > >> > Host + H, not working) but sometimes it boots up normally > >> > and works ok. Is there any workaround? > >> > > >> > > >> > > >> > Thank you > >> > > >> > Michal > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > _______________________________________________ > >> > SailfishOS.org Devel mailing list > >> > > >> > > >> > > >> > > >> > > >> > -- > >> > We are #unlike. > >> > Jolla Oy, http://www.jolla.com > >> > > >> > > >> > > >> > _______________________________________________ > >> > SailfishOS.org Devel mailing list > >> > >> > >> > > > >
_______________________________________________ SailfishOS.org Devel mailing list
