Hi Michal
I am happy to hear that you have found a solution that mostly works.
Pure speculation here, but I wonder if we are dealing with some kind
of timeout?
Is there any difference between your first and second drive (HDD vs
SSD, Filesystem?). I see your D: is NTFS.
I guess that the VBox.log you attached was from a stuck session.
I see that your VM seems to go through quite a few states in a short time:
00:00:03.242833 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:03.244292 Changing the VM state from 'CREATED' to 'LOADING'.
00:00:03.776120 Changing the VM state from 'LOADING' to 'SUSPENDED'.
00:00:03.776245 Changing the VM state from 'SUSPENDED' to 'RESUMING'.
00:00:03.776365 Changing the VM state from 'RESUMING' to 'RUNNING'.
00:00:06.960234 Changing the VM state from 'RUNNING' to 'SUSPENDING'.
00:00:07.085259 Changing the VM state from 'SUSPENDING' to 'SUSPENDED'.
00:13:00.108306 Changing the VM state from 'SUSPENDED' to 'POWERING_OFF'.
00:13:00.109135 Changing the VM state from 'POWERING_OFF' to 'OFF'.
00:13:00.113646 Changing the VM state from 'OFF' to 'DESTROYING'.
00:13:00.217581 Changing the VM state from 'DESTROYING' to 'TERMINATED'.
By comparison, mine (after running for a similar short time) has only
00:00:01.217354 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:01.218570 Changing the VM state from 'CREATED' to 'POWERING_ON'.
00:00:01.220252 Changing the VM state from 'POWERING_ON' to 'RUNNING'.
Chris
Zitat von "Michal Prevratil" <michal.prevra...@hotmail.cz>:
Hi Christopher
The Mer SDK VM is doing fine, everything works ok, no freezes.
I think I have not found anything unexpected in the VBox.log file,
anyway it is attached.
However, I have maybe found a solution. I have reinstalled the
VirtualBox and the Sailfish SDK to my system drive (both of them
were originally installed on my second drive).
Now it seems like the emulator will not freeze immediatelly after
booting anymore. The emulator still rarely freezes but it happens
only after a long while (not right after booting). When I tried to
rise up the emulator's RAM to 2 GB I had again the same problems
described in the last email, so i reverted it back to 512 MB.
Thank you
Michal
Date: Fri, 3 May 2013 07:18:45 +0200
From: christopher.l...@thurweb.ch
To: michal.prevra...@hotmail.cz
CC: devel@lists.sailfishos.org
Subject: Re: [SailfishDevel] Sailfish OS Emulator and Windows 8
Hi Michal
By way of comparison, how is the SDK VM doing? As you have not
mentioned it yet, I guess it is working normally.
Does the VBox.log file (on your host) give any clues?
Grüsse
Chris
Zitat von "Michal Prevratil" <michal.prevra...@hotmail.cz>:
> Hello,
> thank you for your replies.
>
> I am sure that i have enough RAM - 8 GB (but using just 2 GB in the
> emulator, also tried more and less than 2 GB). I am using VirtualBox
> 4.2.12.
>
> When I start the emulator from Qt Creator there are 3 different cases:
>
> a) Emulator works OK, able to ssh in it, able to move with the
> cursor in the emulator
> b) Emulator boots up but screen stays black (Host + H does not
> work), able to ssh in it, able to move with the cursor in the
> emulator on the black screen, does not happen very often
> c) Emulator boots up and freezes, screen is black (Host + H does not
> work), unable to ssh in it (able to found but unable to connect it),
> unable to move the cursor, after a while Qt Creator shows green
> emulator icon and says that the emulator is not running
> In one try the emulator also ran from case a) to case c).
> There is log from booting:
>
> [0.000000] tsc: Fast TSC calibration failed
> [2.922339] EXT3-fs (sda1): error: couldn't mount because of
> unsupported optional features (240)
> [2.954863] EXT2-fs (sda1): error: couldn't mount because of
> unsupported optional features (244)
> [4.791476] systemd[1]:
> [/lib/systemd/system/systemd-journal.service:22] Failed to parse
> capability bounding set, ignoring: CAP_SYS_ADMIN CAP_DAC_OVERRIDE
> CAP_SYS_PTRACE CAP_SYSLOG CAP_AUDIT_CONTROL CAP_CHOW
> CAP_DAC_READ_SEARCH CAP_FOWNER CAP_SETUPID CAP_SETGID
> systemd-fsck[46]: platform: clean, 20816/128000 files,
227235/511999 blocks
> [8.884085] piix4_smbus 0000:00:07.0: SMBus base address
> uninitialized - upgrade BIOS or use force_addr=0xaddr
>
> I have not changed any VirtualBox settings except the emulator's RAM.
>
> Thank you
> Michal
>
> Date: Thu, 2 May 2013 06:56:28 +0300
> From: jarko.vihri...@jollamobile.com
> To: devel@lists.sailfishos.org
> Subject: Re: [SailfishDevel] Sailfish OS Emulator and Windows 8
>
>
>
>
>
>
> Hello,
>
> We don't officially support Windows8 on the alpha SDK but it's in
> the works. In general the Emulator VM depends on the
> characteristics of the VirtualBox setup on the host. Do you have
> enough RAM, do you have VirtualBox 4.2 or newer (I think we
> officially support 4.1 onwards tho).
>
>
>
> When the emulator freezes, can you still ssh into it (i.e. using
> cygwin or equivalent : ssh -i ~/.ssh/mer-qt-creator-rsa -p 2223
> root@localhost) ?
>
>
>
> thanks, Jarko
>
>
>
> On 05/01/2013 09:50 PM, Michal Prevratil wrote:
>
>
>
>
>
>
>
>
> Hi,
>
> I would like to ask if anybody got to work Sailfish SDK
> with Windows 8? I am asking because of my problems with
> emulator. After booting up it seems like freezed (tried
> Host + H, not working) but sometimes it boots up normally
> and works ok. Is there any workaround?
>
>
>
> Thank you
>
> Michal
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> SailfishOS.org Devel mailing list
>
>
>
>
>
> --
> We are #unlike.
> Jolla Oy, http://www.jolla.com
>
>
>
> _______________________________________________
> SailfishOS.org Devel mailing list
_______________________________________________
SailfishOS.org Devel mailing list
