Hi Omkar,

I have a minor suggestion marked inline as [SAMI].

Other than that this patch looks good to me.

Reviewed-by: Sami Mujawar <sami.muja...@arm.com>

Regards,

Sami Mujawar

On 24/08/2021 07:00 AM, Omkar Anand Kulkarni wrote:
Enable the use of HEST table generation protocol, GHES error source
descriptor protocol and DMC-620 MM driver on ARM Neoverse Reference
Design platforms. This allows firmware-first error handling and
reporting of DMC-620 memory controller's 1-bit DRAM ECC errors.

Co-authored-by: Thomas Abraham <thomas.abra...@arm.com>
Signed-off-by: Omkar Anand Kulkarni <omkar.kulka...@arm.com>
---
  Platform/ARM/SgiPkg/SgiPlatform.dsc.inc      | 17 +++++++++++
  Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc    | 30 ++++++++++++++++++++
  Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf |  6 ++++
  Platform/ARM/SgiPkg/SgiPlatform.fdf          |  6 ++++
  4 files changed, 59 insertions(+)

diff --git a/Platform/ARM/SgiPkg/SgiPlatform.dsc.inc 
b/Platform/ARM/SgiPkg/SgiPlatform.dsc.inc
index 7e37732fb93c..bb32584de63d 100644
--- a/Platform/ARM/SgiPkg/SgiPlatform.dsc.inc
+++ b/Platform/ARM/SgiPkg/SgiPlatform.dsc.inc
@@ -21,6 +21,9 @@
    DEFINE LPI_EN                             = FALSE
    DEFINE CPPC_EN                            = FALSE
+ # To allow firmware first error handling, set this to TRUE.
+  DEFINE ENABLE_GHES_MM                     = FALSE
+
  [BuildOptions]
    *_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
@@ -208,6 +211,12 @@
    gArmTokenSpaceGuid.PcdMmBufferBase|0xFF600000
    gArmTokenSpaceGuid.PcdMmBufferSize|0x10000
+!if $(ENABLE_GHES_MM) == TRUE
+  ## GHESv2 Generic Error memory space
+  gArmPlatformTokenSpaceGuid.PcdGhesGenericErrorDataMmBufferBase|0xFF610000
+  gArmPlatformTokenSpaceGuid.PcdGhesGenericErrorDataMmBufferSize|0x20000
+!endif
+
  
################################################################################
  #
  # Components Section - list of all EDK II Modules needed by this Platform
@@ -365,3 +374,11 @@
  !else
    ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
  !endif
+
+  #
+  # GHESv2 HEST error sources support
+  #
+  MdeModulePkg/Universal/Apei/HestDxe/HestDxe.inf
[SAMI] Should HestDxe.inf be included when ENABLE_GHES_MM== TRUE? Same question for SgiPlatform.fdf below.
+!if $(ENABLE_GHES_MM) == TRUE
+  ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
+!endif
diff --git a/Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc 
b/Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc
index 5287e1f8e568..dbba82c74f39 100644
--- a/Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc
+++ b/Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc
@@ -11,6 +11,10 @@
  # Library Class section - list of all Library Classes needed by this Platform.
  #
  
################################################################################
+[Defines]
+  # To enable DMC-620 MM driver, set this to TRUE.
+  DEFINE ENABLE_DMC620_MM                = FALSE
+
  [LibraryClasses]
    #
    # Basic
@@ -94,6 +98,25 @@
    gEfiSecurityPkgTokenSpaceGuid.PcdUserPhysicalPresence|TRUE
  !endif
+!if $(ENABLE_GHES_MM) == TRUE
+  ## GHESv2 Generic Error Memory Space
+  gArmPlatformTokenSpaceGuid.PcdGhesGenericErrorDataMmBufferBase|0xFF610000
+  gArmPlatformTokenSpaceGuid.PcdGhesGenericErrorDataMmBufferSize|0x20000
+!endif
+
+!if $(ENABLE_DMC620_MM) == TRUE
+  ## DMC620
+  gDmc620MmTokenSpaceGuid.PcdDmc620NumCtrl|2
+  gDmc620MmTokenSpaceGuid.PcdDmc620RegisterBase|0x4E000000
+  gDmc620MmTokenSpaceGuid.PcdDmc620CtrlSize|0x100000
+  gDmc620MmTokenSpaceGuid.PcdDmc620CorrectableErrorThreshold|10
+  gDmc620MmTokenSpaceGuid.PcdDmc620ErrSourceCount|1
+  gDmc620MmTokenSpaceGuid.PcdDmc620DramErrorSdeiEventBase|804
+  gDmc620MmTokenSpaceGuid.PcdDmc620DramOneBitErrorDataBase|0xFF610000
+  gDmc620MmTokenSpaceGuid.PcdDmc620DramOneBitErrorDataSize|0x100
+  gDmc620MmTokenSpaceGuid.PcdDmc620DramOneBitErrorSourceId|0
+!endif
+
  
###################################################################################################
  #
  # Components Section - list of the modules and components that will be 
processed by compilation
@@ -134,6 +157,13 @@
    }
  !endif
+!if $(ENABLE_GHES_MM) == TRUE
+  ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.inf
+!endif
+!if $(ENABLE_DMC620_MM) == TRUE
+  Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.inf
+!endif
+
  
###################################################################################################
  #
  # BuildOptions Section - Define the module specific tool chain flags that 
should be used as
diff --git a/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf 
b/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf
index c1c24b747fa5..e029b9164570 100644
--- a/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf
+++ b/Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf
@@ -48,6 +48,12 @@ READ_STATUS        = TRUE
  READ_LOCK_CAP      = TRUE
  READ_LOCK_STATUS   = TRUE
+!if $(ENABLE_GHES_MM) == TRUE
+  INF ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceStandaloneMm.inf
+!endif
+!if $(ENABLE_DMC620_MM) == TRUE
+  INF Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.inf
+!endif
    INF StandaloneMmPkg/Core/StandaloneMmCore.inf
  !if $(SECURE_STORAGE_ENABLE) == TRUE
    INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashStandaloneMm.inf
diff --git a/Platform/ARM/SgiPkg/SgiPlatform.fdf 
b/Platform/ARM/SgiPkg/SgiPlatform.fdf
index 8227ae03330c..d6e942e19b81 100644
--- a/Platform/ARM/SgiPkg/SgiPlatform.fdf
+++ b/Platform/ARM/SgiPkg/SgiPlatform.fdf
@@ -179,6 +179,12 @@ READ_LOCK_STATUS   = TRUE
    # MM Communicate
    INF ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
+ # Hest Error Source Support
+  INF MdeModulePkg/Universal/Apei/HestDxe/HestDxe.inf
+!if $(ENABLE_GHES_MM) == TRUE
+  INF ArmPlatformPkg/Drivers/HestMmErrorSources/HestErrorSourceDxe.inf
+!endif
+
    #
    # Platform driver
    #



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#81446): https://edk2.groups.io/g/devel/message/81446
Mute This Topic: https://groups.io/mt/85104847/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to