Hi Ard,

I will review the series this week.

Regards,

Sami Mujawar

On 22/09/2021, 12:47, "Ard Biesheuvel" <a...@kernel.org> wrote:

    On Fri, 3 Sept 2021 at 15:39, Omkar Kulkarni <omkar.kulka...@arm.com> wrote:
    >
    > Gentle reminder, to review this patch series.
    >

    Sami, would you mind taking this one?


    >
    > > On August 24, 2021 11:30 AM, Omkar Kulkarni wrote:
    > > Changes since v2:
    > > - Rebased to the latest upstream code.
    > >
    > > This patch series introduces platform support for RAS using Firmware 
First
    > > error handling. Firmware first error handling on ARM Neoverse reference
    > > design platforms is achieved using HEST[1] and SDEI[2] ACPI tables.
    > >
    > > For doing so the Platform Error handler DXE driver is introduced. This 
driver
    > > is integral part of the firmware first error handling framework in 
EDK2. SDEI
    > > being the notification mechanism used to communicate the platform errors
    > > to OSPM, it builds and installs the SDEI ACPI table. Also installs the 
HEST table
    > > which is already created as part of firmware first framework in EDK2.
    > >
    > > This series does provide a reference implementation to leverage the
    > > firmware first framework by implementing a platform MM driver for
    > > Dynamic Memory Controller DMC[3] that has RAS feature enabled. This
    > > driver mainly handles
    > > following:
    > > - Implements the Hest Error Source Descriptor protocol introduced as 
part of
    > >   firmware first framework in EDK2. Publishes the 1-bit ECC DRAM error
    > > sources
    > >   as GHESv2[4] type error source descriptors.
    > > - For any 1-bit CE that occurs on DRAM it reads DMC error record 
registers
    > > and
    > >   populates a error status block (CPER)[5] of Memory Type error[6].
    > >
    > > References:
    > > [1] : ACPI 6.3, Table 18-382, Hardware Error Source Table [2] : SDEI 
Platform
    > > Design Document, revision b, 10 Appendix C, ACPI table
    > >       definitions for SDEI
    > > [3] : DMC620 Dynamic Memory Controller, revision r1p0 [4] : ACPI 
Reference
    > > Specification 6.3, Table 18-393 GHESv2 Structure [5] : UEFI Reference
    > > Specification 2.8, Appendix N - Common Platform Error
    > >       Record
    > > [6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error 
Section
    > >
    > > This patch series is dependent on the edk2 patch series
    > > https://edk2.groups.io/g/devel/message/79741
    > >
    > > Link to github branch with the patches in this series -
    > > https://github.com/omkkul01/edk2-platforms/tree/ras_firware_first_edk2-
    > > platforms_v3
    > >
    > > Omkar Anand Kulkarni (5):
    > >   Platform/ARM: Add DMC-620 ECC error handling driver
    > >   Platform/Sgi: dmc-620 firmware-first error handling
    > >   Platform/Sgi: define memory region for GHES error status block
    > >   Platform/Sgi: Define values for ACPI table header
    > >   Platform/Sgi: Add platform error handling driver
    > >
    > >  Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.dec    |  30 ++
    > >  Platform/ARM/SgiPkg/SgiPlatform.dec           |   1 +
    > >  Platform/ARM/SgiPkg/SgiPlatform.dsc.inc       |  38 ++
    > >  Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc     |  30 ++
    > >  Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf  |   6 +
    > >  Platform/ARM/SgiPkg/SgiPlatform.fdf           |  13 +
    > >  Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.inf    |  61 +++
    > >  .../PlatformErrorHandlerDxe.inf               |  51 +++
    > >  .../Library/PlatformLib/PlatformLib.inf       |   6 +
    > >  Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.h      | 174 +++++++++
    > >  Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.c      | 362
    > > ++++++++++++++++++
    > >  .../Dmc620Mm/Dmc620MmErrorSourceInfo.c        | 194 ++++++++++
    > >  .../PlatformErrorHandlerDxe.c                 | 171 +++++++++
    > >  .../Library/PlatformLib/PlatformLibMem.c      |  13 +-
    > >  14 files changed, 1148 insertions(+), 2 deletions(-)  create mode 
100644
    > > Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.dec
    > >  create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.inf
    > >  create mode 100644
    > > Platform/ARM/SgiPkg/Drivers/PlatformErrorHandlerDxe/PlatformErrorHandl
    > > erDxe.inf
    > >  create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.h
    > >  create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.c
    > >  create mode 100644
    > > Platform/ARM/Drivers/Dmc620Mm/Dmc620MmErrorSourceInfo.c
    > >  create mode 100644
    > > Platform/ARM/SgiPkg/Drivers/PlatformErrorHandlerDxe/PlatformErrorHandl
    > > erDxe.c
    > >
    > > --
    > > 2.17.1
    > >
    > >
    > >
    > > -=-=-=-=-=-=
    > > Groups.io Links: You receive all messages sent to this group.
    > > View/Reply Online (#79749): https://edk2.groups.io/g/devel/message/79749
    > > Mute This Topic: https://groups.io/mt/85104844/4857533
    > > Group Owner: devel+ow...@edk2.groups.io
    > > Unsubscribe: https://edk2.groups.io/g/devel/unsub
    > > [omkar.kulka...@arm.com]
    > > -=-=-=-=-=-=
    > >
    >
    > IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.

IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#80960): https://edk2.groups.io/g/devel/message/80960
Mute This Topic: https://groups.io/mt/85104844/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Reply via email to