Changes since v2:
- Rebased to the latest upstream code.
This patch series introduces platform support for RAS using Firmware First
error handling. Firmware first error handling on ARM Neoverse reference design
platforms is achieved using HEST[1] and SDEI[2] ACPI tables.
For doing so the Platform Error handler DXE driver is introduced. This driver
is integral part of the firmware first error handling framework in EDK2. SDEI
being the notification mechanism used to communicate the platform errors to
OSPM, it builds and installs the SDEI ACPI table. Also installs the HEST table
which is already created as part of firmware first framework in EDK2.
This series does provide a reference implementation to leverage the firmware
first framework by implementing a platform MM driver for Dynamic Memory
Controller DMC[3] that has RAS feature enabled. This driver mainly handles
following:
- Implements the Hest Error Source Descriptor protocol introduced as part of
firmware first framework in EDK2. Publishes the 1-bit ECC DRAM error sources
as GHESv2[4] type error source descriptors.
- For any 1-bit CE that occurs on DRAM it reads DMC error record registers and
populates a error status block (CPER)[5] of Memory Type error[6].
References:
[1] : ACPI 6.3, Table 18-382, Hardware Error Source Table
[2] : SDEI Platform Design Document, revision b, 10 Appendix C, ACPI table
definitions for SDEI
[3] : DMC620 Dynamic Memory Controller, revision r1p0
[4] : ACPI Reference Specification 6.3, Table 18-393 GHESv2 Structure
[5] : UEFI Reference Specification 2.8, Appendix N - Common Platform Error
Record
[6] : UEFI Reference Specification 2.8, Section N.2.5 Memory Error Section
This patch series is dependent on the edk2 patch series
https://edk2.groups.io/g/devel/message/79741
Link to github branch with the patches in this series -
https://github.com/omkkul01/edk2-platforms/tree/ras_firware_first_edk2-platforms_v3
Omkar Anand Kulkarni (5):
Platform/ARM: Add DMC-620 ECC error handling driver
Platform/Sgi: dmc-620 firmware-first error handling
Platform/Sgi: define memory region for GHES error status block
Platform/Sgi: Define values for ACPI table header
Platform/Sgi: Add platform error handling driver
Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.dec | 30 ++
Platform/ARM/SgiPkg/SgiPlatform.dec | 1 +
Platform/ARM/SgiPkg/SgiPlatform.dsc.inc | 38 ++
Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc | 30 ++
Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf | 6 +
Platform/ARM/SgiPkg/SgiPlatform.fdf | 13 +
Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.inf | 61 +++
.../PlatformErrorHandlerDxe.inf | 51 +++
.../Library/PlatformLib/PlatformLib.inf | 6 +
Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.h | 174 +++++++++
Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.c | 362 ++++++++++++++++++
.../Dmc620Mm/Dmc620MmErrorSourceInfo.c | 194 ++++++++++
.../PlatformErrorHandlerDxe.c | 171 +++++++++
.../Library/PlatformLib/PlatformLibMem.c | 13 +-
14 files changed, 1148 insertions(+), 2 deletions(-)
create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.dec
create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.inf
create mode 100644
Platform/ARM/SgiPkg/Drivers/PlatformErrorHandlerDxe/PlatformErrorHandlerDxe.inf
create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.h
create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620Mm.c
create mode 100644 Platform/ARM/Drivers/Dmc620Mm/Dmc620MmErrorSourceInfo.c
create mode 100644
Platform/ARM/SgiPkg/Drivers/PlatformErrorHandlerDxe/PlatformErrorHandlerDxe.c
--
2.17.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79749): https://edk2.groups.io/g/devel/message/79749
Mute This Topic: https://groups.io/mt/85104844/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
