On 07/01/20 06:04, Gary Lin wrote:
> This is the first part of LsiScsiPassThru(). Before processing the SCSI
> Request packet, we have to make sure whether the packet is valid or not.
>
> Cc: Jordan Justen <jordan.l.jus...@intel.com>
> Cc: Laszlo Ersek <ler...@redhat.com>
> Cc: Ard Biesheuvel <ard.biesheu...@arm.com>
> Signed-off-by: Gary Lin <g...@suse.com>
> ---
> OvmfPkg/LsiScsiDxe/LsiScsi.c | 100 ++++++++++++++++++++++++++++++++++-
> OvmfPkg/LsiScsiDxe/LsiScsi.h | 4 ++
> 2 files changed, 103 insertions(+), 1 deletion(-)
>
> diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
> index b728d18d51df..1bcebd92e455 100644
> --- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
> +++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
> @@ -52,6 +52,95 @@ LsiScsiReset (
> return Out8 (Dev, LSI_REG_ISTAT0, LSI_ISTAT0_SRST);
> }
>
> +STATIC
> +EFI_STATUS
> +ReportHostAdapterOverrunError (
> + OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
> + )
> +{
> + Packet->SenseDataLength = 0;
> + Packet->HostAdapterStatus =
> + EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN;
> + Packet->TargetStatus = EFI_EXT_SCSI_STATUS_TARGET_GOOD;
> + return EFI_BAD_BUFFER_SIZE;
> +}
> +
> +/**
> +
> + Check the request packet from the Extended SCSI Pass Thru Protocol. The
> + request packet is modified, to be forwarded outwards by LsiScsiPassThru(),
> + if invalid or unsupported parameters are detected.
> +
> + @param[in] Dev The LSI 53C895A SCSI device the packet targets.
> +
> + @param[in] Target The SCSI target controlled by the LSI 53C895A SCSI
> + device.
> +
> + @param[in] Lun The Logical Unit Number under the SCSI target.
> +
> + @param[in out] Packet The Extended SCSI Pass Thru Protocol packet.
> +
> +
> + @retval EFI_SUCCESS The Extended SCSI Pass Thru Protocol packet was valid.
> +
> + @return Otherwise, invalid or unsupported parameters were
> + detected. Status codes are meant for direct forwarding
> + by the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()
> + implementation.
> +
> + **/
> +STATIC
> +EFI_STATUS
> +LsiScsiCheckRequest (
> + IN LSI_SCSI_DEV *Dev,
> + IN UINT8 Target,
> + IN UINT64 Lun,
> + IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet
> + )
> +{
> + if (Target > Dev->MaxTarget || Lun > Dev->MaxLun ||
> + Packet->DataDirection > EFI_EXT_SCSI_DATA_DIRECTION_BIDIRECTIONAL ||
> + //
> + // Trying to receive, but destination pointer is NULL, or contradicting
> + // transfer direction
> + //
> + (Packet->InTransferLength > 0 &&
> + (Packet->InDataBuffer == NULL ||
> + Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_WRITE
> + )
> + ) ||
> +
> + //
> + // Trying to send, but source pointer is NULL, or contradicting
> transfer
> + // direction
> + //
> + (Packet->OutTransferLength > 0 &&
> + (Packet->OutDataBuffer == NULL ||
> + Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ
> + )
> + )
> + ) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_BIDIRECTIONAL ||
> + (Packet->InTransferLength > 0 && Packet->OutTransferLength > 0) ||
> + Packet->CdbLength > sizeof Dev->Dma->Cdb) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + if (Packet->InTransferLength > sizeof Dev->Dma->Data) {
> + Packet->InTransferLength = sizeof Dev->Dma->Data;
> + return ReportHostAdapterOverrunError (Packet);
> + }
> + if (Packet->OutTransferLength > sizeof Dev->Dma->Data) {
> + Packet->OutTransferLength = sizeof Dev->Dma->Data;
> + return ReportHostAdapterOverrunError (Packet);
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> //
> // The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
> // for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,
> @@ -70,7 +159,16 @@ LsiScsiPassThru (
> IN EFI_EVENT Event OPTIONAL
> )
> {
> - return EFI_UNSUPPORTED;
> + EFI_STATUS Status;
> + LSI_SCSI_DEV *Dev;
> +
> + Dev = LSI_SCSI_FROM_PASS_THRU (This);
> + Status = LsiScsiCheckRequest (Dev, *Target, Lun, Packet);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + return EFI_SUCCESS;
> }
>
> EFI_STATUS
In this patch, we do not implement LsiScsiPassThru() completely yet.
Therefore we should not return EFI_SUCCESS, just because
LsiScsiCheckRequest() succeeds.
(1) So please keep the EFI_UNSUPPORTED value for the last "return"
statement in the function, for now.
EFI_UNSUPPORTED should be replaced with EFI_SUCCESS in "[PATCH 10/11]
OvmfPkg/LsiScsiDxe: Process the SCSI Request Packet".
With that update, for this patch:
Reviewed-by: Laszlo Ersek <ler...@redhat.com>
Thanks
Laszlo
> diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
> index 1e4bbc56f933..9272eb7506c7 100644
> --- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
> +++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
> @@ -13,6 +13,10 @@
> #define _LSI_SCSI_DXE_H_
>
> typedef struct {
> + //
> + // The max size of CDB is 32.
> + //
> + UINT8 Cdb[32];
> //
> // Allocate 64KB for read/write buffer.
> //
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#62133): https://edk2.groups.io/g/devel/message/62133
Mute This Topic: https://groups.io/mt/75228768/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
