Map DMA buffer and perpare for the implementation of LsiScsiPassThru().
Cc: Jordan Justen <jordan.l.jus...@intel.com>
Cc: Laszlo Ersek <ler...@redhat.com>
Cc: Ard Biesheuvel <ard.biesheu...@arm.com>
Signed-off-by: Gary Lin <g...@suse.com>
---
OvmfPkg/LsiScsiDxe/LsiScsi.c | 85 +++++++++++++++++++++++++++++++++++-
OvmfPkg/LsiScsiDxe/LsiScsi.h | 10 +++++
2 files changed, 94 insertions(+), 1 deletion(-)
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
index f03774cc4ced..b728d18d51df 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
@@ -359,6 +359,8 @@ LsiScsiControllerStart (
{
EFI_STATUS Status;
LSI_SCSI_DEV *Dev;
+ UINTN Pages;
+ UINTN BytesMapped;
Dev = AllocateZeroPool (sizeof (*Dev));
if (Dev == NULL) {
@@ -406,11 +408,68 @@ LsiScsiControllerStart (
goto CloseProtocol;
}
- Status = LsiScsiReset (Dev);
+ //
+ // Signal device supports 64-bit DMA addresses
+ //
+ Status = Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationEnable,
+ EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // Warn user that device will only be using 32-bit DMA addresses.
+ //
+ // Note that this does not prevent the device/driver from working
+ // and therefore we only warn and continue as usual.
+ //
+ DEBUG ((
+ DEBUG_WARN,
+ "%a: failed to enable 64-bit DMA addresses\n",
+ __FUNCTION__
+ ));
+ }
+
+ //
+ // Create buffers for data transfer
+ //
+ Pages = EFI_SIZE_TO_PAGES (sizeof (*Dev->Dma));
+ Status = Dev->PciIo->AllocateBuffer (
+ Dev->PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ Pages,
+ (VOID **)&Dev->Dma,
+ EFI_PCI_ATTRIBUTE_MEMORY_CACHED
+ );
if (EFI_ERROR (Status)) {
goto RestoreAttributes;
}
+ BytesMapped = EFI_PAGES_TO_SIZE (Pages);
+ Status = Dev->PciIo->Map (
+ Dev->PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ Dev->Dma,
+ &BytesMapped,
+ &Dev->DmaPhysical,
+ &Dev->DmaMapping
+ );
+ if (EFI_ERROR (Status)) {
+ goto FreeBuffer;
+ }
+
+ if (BytesMapped != EFI_PAGES_TO_SIZE (Pages)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Unmap;
+ }
+
+ Status = LsiScsiReset (Dev);
+ if (EFI_ERROR (Status)) {
+ goto Unmap;
+ }
+
Status = gBS->CreateEvent (
EVT_SIGNAL_EXIT_BOOT_SERVICES,
TPL_CALLBACK,
@@ -457,6 +516,19 @@ CloseExitBoot:
UninitDev:
LsiScsiReset (Dev);
+Unmap:
+ Dev->PciIo->Unmap (
+ Dev->PciIo,
+ Dev->DmaMapping
+ );
+
+FreeBuffer:
+ Dev->PciIo->FreeBuffer (
+ Dev->PciIo,
+ Pages,
+ Dev->Dma
+ );
+
RestoreAttributes:
Dev->PciIo->Attributes (
Dev->PciIo,
@@ -519,6 +591,17 @@ LsiScsiControllerStop (
LsiScsiReset (Dev);
+ Dev->PciIo->Unmap (
+ Dev->PciIo,
+ Dev->DmaMapping
+ );
+
+ Dev->PciIo->FreeBuffer (
+ Dev->PciIo,
+ EFI_SIZE_TO_PAGES (sizeof (*Dev->Dma)),
+ Dev->Dma
+ );
+
Dev->PciIo->Attributes (
Dev->PciIo,
EfiPciIoAttributeOperationSet,
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
index ffaee6188536..1e4bbc56f933 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
@@ -12,6 +12,13 @@
#ifndef _LSI_SCSI_DXE_H_
#define _LSI_SCSI_DXE_H_
+typedef struct {
+ //
+ // Allocate 64KB for read/write buffer.
+ //
+ UINT8 Data[0x10000];
+} LSI_SCSI_DMA_BUFFER;
+
typedef struct {
UINT32 Signature;
UINT64 OrigPciAttrs;
@@ -19,6 +26,9 @@ typedef struct {
EFI_PCI_IO_PROTOCOL *PciIo;
UINT8 MaxTarget;
UINT8 MaxLun;
+ LSI_SCSI_DMA_BUFFER *Dma;
+ EFI_PHYSICAL_ADDRESS DmaPhysical;
+ VOID *DmaMapping;
EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL PassThru;
} LSI_SCSI_DEV;
--
2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#61908): https://edk2.groups.io/g/devel/message/61908
Mute This Topic: https://groups.io/mt/75228767/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
