REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will add the definitions for EDKII microcode patch HOB.
The intention of adding this HOB is to provide a scheme to store the below
information:
A. The base address and size of the microcode patches that are being
loaded (from flash) into memory;
B. The information of detected microcode patch for each processor within
the system.
The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
detect and apply of the microcode happen). The consumer of the HOB can be
modules that want to detect/apply the microcode patch by themselves again
later during the boot flow.
Cc: Eric Dong <eric.d...@intel.com>
Cc: Ray Ni <ray...@intel.com>
Cc: Laszlo Ersek <ler...@redhat.com>
Cc: Star Zeng <star.z...@intel.com>
Cc: Siyuan Fu <siyuan...@intel.com>
Cc: Michael D Kinney <michael.d.kin...@intel.com>
Signed-off-by: Hao A Wu <hao.a...@intel.com>
Reviewed-by: Ray Ni <ray...@intel.com>
Reviewed-by: Eric Dong <eric.d...@intel.com>
---
UefiCpuPkg/UefiCpuPkg.dec | 3 ++
UefiCpuPkg/Include/Guid/MicrocodePatchHob.h | 44 ++++++++++++++++++++
2 files changed, 47 insertions(+)
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 797f948631..45b267ac61 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -63,6 +63,9 @@ [Guids]
## Include/Guid/CpuFeaturesInitDone.h
gEdkiiCpuFeaturesInitDoneGuid = { 0xc77c3a41, 0x61ab, 0x4143, { 0x98, 0x3e,
0x33, 0x39, 0x28, 0x6, 0x28, 0xe5 }}
+ ## Include/Guid/MicrocodePatchHob.h
+ gEdkiiMicrocodePatchHobGuid = { 0xd178f11d, 0x8716, 0x418e, { 0xa1, 0x31,
0x96, 0x7d, 0x2a, 0xc4, 0x28, 0x43 }}
+
[Protocols]
## Include/Protocol/SmmCpuService.h
gEfiSmmCpuServiceProtocolGuid = { 0x1d202cab, 0xc8ab, 0x4d5c, { 0x94, 0xf7,
0x3c, 0xfc, 0xc0, 0xd3, 0xd3, 0x35 }}
diff --git a/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
b/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
new file mode 100644
index 0000000000..2d307fbffb
--- /dev/null
+++ b/UefiCpuPkg/Include/Guid/MicrocodePatchHob.h
@@ -0,0 +1,44 @@
+/** @file
+ The microcode patch HOB is used to store the information of:
+ A. Base address and size of the loaded microcode patches data;
+ B. Detected microcode patch for each processor within system.
+
+ Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef _MICROCODE_PATCH_HOB_H_
+#define _MICROCODE_PATCH_HOB_H_
+
+extern EFI_GUID gEdkiiMicrocodePatchHobGuid;
+
+//
+// The EDKII microcode patch HOB will be produced by MpInitLib and it can be
+// consumed by modules that want to detect/apply microcode patches.
+//
+typedef struct {
+ //
+ // The base address of the microcode patches data after being loaded into
+ // memory.
+ //
+ UINT64 MicrocodePatchAddress;
+ //
+ // The total size of the loaded microcode patches.
+ //
+ UINT64 MicrocodePatchRegionSize;
+ //
+ // The number of processors within the system.
+ //
+ UINT32 ProcessorCount;
+ //
+ // An array with 'ProcessorCount' elements that stores the offset (with
+ // regard to 'MicrocodePatchAddress') of the detected microcode patch
+ // (including the CPU_MICROCODE_HEADER data structure) for each processor.
+ // If no microcode patch is detected for certain processor, the relating
+ // element will be set to MAX_UINT64.
+ //
+ UINT64 ProcessorSpecificPatchOffset[0];
+} EDKII_MICROCODE_PATCH_HOB;
+
+#endif
--
2.12.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#52616): https://edk2.groups.io/g/devel/message/52616
Mute This Topic: https://groups.io/mt/69341885/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
