Signed-off-by: nickcooper-zhangtonghao <nickcooper-zhangtong...@opencloud.tech> --- ovn/utilities/ovn-nbctl.8.xml | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/ovn/utilities/ovn-nbctl.8.xml b/ovn/utilities/ovn-nbctl.8.xml index d44f039..fa908b7 100644 --- a/ovn/utilities/ovn-nbctl.8.xml +++ b/ovn/utilities/ovn-nbctl.8.xml @@ -102,6 +102,41 @@ </dd> </dl> + <h1>Logical Switch LB Commands</h1> + <dl> + <dt>[<code>--may-exist</code>] <code>lb-add</code> <var>switch</var> <var>lb</var> <var>vip</var> <var>ips</var> [<var>protocol</var>]</dt> + <dd> + Adds the specified LB to <var>switch</var>. We should assign <var>lb</var> + a virtual IPv4 address (and an optional port number with : as a separator) + and the corresponding endpoint IPv4 addresses (and optional port numbers + with : as separators) separated by commas. The optional argument <var>protocol</var> + must be either <code>tcp</code> or <code>udp</code>. This argument is useful + when a port number is provided as part of the <var>vip</var>. If the <var>protocol</var> + is unspecified and a port number is provided as part of <var>vip</var>, + OVN assumes the <var>protocol</var> to be <code>tcp</code>. It is an error if a load-balancer + named <var>lb</var> already exists, unless <code>--may-exist</code> is specified. + The following example adds a load-balancer with <var>protocol</var> <code>udp</code>: + <p> + <code>lb-add ls0 lb0 30.0.0.10:80 192.168.10.10:80,192.168.10.20:80,192.168.10.30:80 udp</code> + </p> + </dd> + + <dt>[<code>--if-exists</code>] <code>lb-del</code> <var>switch</var> [<var>lb</var>]</dt> + <dd> + Deletes LBs from <var>switch</var>. If only + <var>switch</var> is supplied, all the LBs from the logical + switch are deleted. If <var>lb</var> is also specified, + then the <var>lb</var> will be deleted only from the logical switch. + It is an error if <var>lb</var> does not exist, unless <code>--if-exists</code> + is specified. + </dd> + + <dt><code>lb-list</code> <var>switch</var></dt> + <dd> + Lists the LBs on <var>switch</var>. + </dd> + </dl> + <h1>Logical Switch Port Commands</h1> <dl> <dt>[<code>--may-exist</code>] <code>lsp-add</code> <var>switch</var> <var>port</var></dt> -- 1.8.3.1 _______________________________________________ dev mailing list dev@openvswitch.org http://openvswitch.org/mailman/listinfo/dev