Signed-off-by: Shahaf Shuler <shah...@mellanox.com> --- On v3: - Highlighted flow counters are supported only in MLNX_OFED.
On v2: - Updated the OFED version for mlx4 guide as well. --- doc/guides/nics/mlx4.rst | 2 +- doc/guides/nics/mlx5.rst | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst index 88161781c..13cc6ec8a 100644 --- a/doc/guides/nics/mlx4.rst +++ b/doc/guides/nics/mlx4.rst @@ -219,7 +219,7 @@ Current RDMA core package and Linux kernel (recommended) Mellanox OFED as a fallback ~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- `Mellanox OFED`_ version: **4.2**. +- `Mellanox OFED`_ version: **4.2, 4.3**. - firmware version: **2.42.5000** and above. .. _`Mellanox OFED`: http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index a9e4bf51a..d54ff760a 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -131,7 +131,7 @@ Limitations - A multi segment packet must have less than 6 segments in case the Tx burst function is set to multi-packet send or Enhanced multi-packet send. Otherwise it must have less than 50 segments. -- Count action for RTE flow is only supported in Mellanox OFED 4.2. +- Count action for RTE flow is **only supported in Mellanox OFED**. - Flows with a VXLAN Network Identifier equal (or ends to be equal) to 0 are not supported. - VXLAN TSO and checksum offloads are not supported on VM. @@ -392,7 +392,7 @@ RMDA Core with Linux Kernel Mellanox OFED ^^^^^^^^^^^^^ -- Mellanox OFED version: **4.2**. +- Mellanox OFED version: **4.2, 4.3**. - firmware version: - ConnectX-4: **12.21.1000** and above. -- 2.12.0
