On Mon, Feb 05, 2018 at 02:31:12PM +0200, Shahaf Shuler wrote: > Signed-off-by: Shahaf Shuler <shah...@mellanox.com>
With one minor nit, title only mentions mlx5 while mlx4 is also affected: Acked-by: Adrien Mazarguil <adrien.mazarg...@6wind.com> > --- > > On v3: > - Highlighted flow counters are supported only in MLNX_OFED. > > On v2: > - Updated the OFED version for mlx4 guide as well. > --- > doc/guides/nics/mlx4.rst | 2 +- > doc/guides/nics/mlx5.rst | 4 ++-- > 2 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst > index 88161781c..13cc6ec8a 100644 > --- a/doc/guides/nics/mlx4.rst > +++ b/doc/guides/nics/mlx4.rst > @@ -219,7 +219,7 @@ Current RDMA core package and Linux kernel (recommended) > Mellanox OFED as a fallback > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > -- `Mellanox OFED`_ version: **4.2**. > +- `Mellanox OFED`_ version: **4.2, 4.3**. > - firmware version: **2.42.5000** and above. > > .. _`Mellanox OFED`: > http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers > diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst > index a9e4bf51a..d54ff760a 100644 > --- a/doc/guides/nics/mlx5.rst > +++ b/doc/guides/nics/mlx5.rst > @@ -131,7 +131,7 @@ Limitations > - A multi segment packet must have less than 6 segments in case the Tx burst > function > is set to multi-packet send or Enhanced multi-packet send. Otherwise it > must have > less than 50 segments. > -- Count action for RTE flow is only supported in Mellanox OFED 4.2. > +- Count action for RTE flow is **only supported in Mellanox OFED**. > - Flows with a VXLAN Network Identifier equal (or ends to be equal) > to 0 are not supported. > - VXLAN TSO and checksum offloads are not supported on VM. > @@ -392,7 +392,7 @@ RMDA Core with Linux Kernel > Mellanox OFED > ^^^^^^^^^^^^^ > > -- Mellanox OFED version: **4.2**. > +- Mellanox OFED version: **4.2, 4.3**. > - firmware version: > > - ConnectX-4: **12.21.1000** and above. > -- > 2.12.0 > -- Adrien Mazarguil 6WIND
