Support enabling/disabling VF broadcast mode from PF.
User can call the API on PF to enable/disable a specific
VF's broadcast mode.
Signed-off-by: Bernard Iremonger <bernard.iremon...@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 43 +++++++++++++++++++++++++++++++
drivers/net/i40e/rte_pmd_i40e.h | 18 +++++++++++++
drivers/net/i40e/rte_pmd_i40e_version.map | 1 +
3 files changed, 62 insertions(+)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index c571d8b..10be00c 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -10414,3 +10414,46 @@ int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port,
uint16_t vf_id,
return ret;
}
+
+int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id, uint8_t on)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct i40e_pf *pf;
+ struct i40e_pf_vf *vf;
+ struct i40e_hw *hw;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ hw = I40E_PF_TO_HW(pf);
+
+ if (vf_id > pf->vf_num)
+ return -EINVAL;
+
+ /**
+ * return -ENODEV if SRIOV not enabled, VF number not configured
+ * or no queue assigned.
+ */
+ if (!hw->func_caps.sr_iov_1_1 || pf->vf_num == 0 || pf->vf_nb_qps == 0)
+ return -ENODEV;
+
+ vf = &pf->vfs[vf_id];
+ hw = I40E_VSI_TO_HW(vf->vsi);
+
+ ret = i40e_aq_set_vsi_broadcast(hw, vf->vsi->seid, on, NULL);
+ if (ret != I40E_SUCCESS)
+ PMD_DRV_LOG(ERR, "Failed to set VSI broadcast");
+
+ return ret;
+}
diff --git a/drivers/net/i40e/rte_pmd_i40e.h b/drivers/net/i40e/rte_pmd_i40e.h
index 8867e9c..3e7ecb7 100644
--- a/drivers/net/i40e/rte_pmd_i40e.h
+++ b/drivers/net/i40e/rte_pmd_i40e.h
@@ -226,4 +226,22 @@ int rte_pmd_i40e_set_vf_mac_addr(uint8_t port, uint16_t
vf_id,
int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port, uint16_t vf_id,
uint16_t vlan_id);
+/**
+ * Enable/Disable vf broadcast mode
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 0 - Disable broadcast.
+ * 1 - Enable broadcast.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id, uint8_t on);
+
#endif /* _PMD_I40E_H_ */
diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map
b/drivers/net/i40e/rte_pmd_i40e_version.map
index e5e70e9..76a3ef8 100644
--- a/drivers/net/i40e/rte_pmd_i40e_version.map
+++ b/drivers/net/i40e/rte_pmd_i40e_version.map
@@ -15,5 +15,6 @@ DPDK_17.02 {
rte_pmd_i40e_set_vf_mac_addr;
rte_pmd_i40e_set_vf_vlan_stripq;
rte_pmd_i40e_set_vf_vlan_insert;
+ rte_pmd_i40e_set_vf_broadcast;
} DPDK_2.0;
--
1.9.3
