The XGBE hardware has support for performing MDIO operations using an
MDIO command request. The driver mistakenly uses the mdio port address
as the MDIO command request device address instead of the MDIO command
request port address. Additionally, the driver does not properly check
for and create a clause 45 MDIO command.

Check the supplied MDIO register to determine if the request is a clause
45 operation (MII_ADDR_C45). For a clause 45 operation, extract device
address and register number from the supplied MDIO register and use them
to set the MDIO command request device address and register number fields.
For a clause 22 operation, the MDIO request device address is set to zero
and the MDIO command request register number is set to the supplied MDIO
register. In either case, the supplied MDIO port address is used as the
MDIO command request port address.

Signed-off-by: Venkat Kumar Ande <venkatkumar.a...@amd.com>
---
 drivers/net/axgbe/axgbe_common.h |  2 --
 drivers/net/axgbe/axgbe_dev.c    | 22 ++++++++++++++++------
 2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index a5d11c5832..51532fb34a 100644
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -407,8 +407,6 @@
 #define MAC_MDIOSCAR_PA_WIDTH          5
 #define MAC_MDIOSCAR_RA_INDEX          0
 #define MAC_MDIOSCAR_RA_WIDTH          16
-#define MAC_MDIOSCAR_REG_INDEX         0
-#define MAC_MDIOSCAR_REG_WIDTH         21
 #define MAC_MDIOSCCDR_BUSY_INDEX       22
 #define MAC_MDIOSCCDR_BUSY_WIDTH       1
 #define MAC_MDIOSCCDR_CMD_INDEX                16
diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c
index 6a7fddffca..3389954aa6 100644
--- a/drivers/net/axgbe/axgbe_dev.c
+++ b/drivers/net/axgbe/axgbe_dev.c
@@ -63,15 +63,27 @@ static int mdio_complete(struct axgbe_port *pdata)
        return 0;
 }
 
+static unsigned int axgbe_create_mdio_sca(int port, int reg)
+{
+       unsigned int mdio_sca, da;
+
+       da = (reg & MII_ADDR_C45) ? reg >> 16 : 0;
+
+       mdio_sca = 0;
+       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, RA, reg);
+       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, PA, port);
+       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, da);
+
+       return mdio_sca;
+}
+
 static int axgbe_write_ext_mii_regs(struct axgbe_port *pdata, int addr,
                                    int reg, u16 val)
 {
        unsigned int mdio_sca, mdio_sccd;
        uint64_t timeout;
 
-       mdio_sca = 0;
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg);
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr);
+       mdio_sca = axgbe_create_mdio_sca(addr, reg);
        AXGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca);
 
        mdio_sccd = 0;
@@ -97,9 +109,7 @@ static int axgbe_read_ext_mii_regs(struct axgbe_port *pdata, 
int addr,
        unsigned int mdio_sca, mdio_sccd;
        uint64_t timeout;
 
-       mdio_sca = 0;
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, REG, reg);
-       AXGMAC_SET_BITS(mdio_sca, MAC_MDIOSCAR, DA, addr);
+       mdio_sca = axgbe_create_mdio_sca(addr, reg);
        AXGMAC_IOWRITE(pdata, MAC_MDIOSCAR, mdio_sca);
 
        mdio_sccd = 0;
-- 
2.34.1

Reply via email to