Hi Cristian,
I agree the 64-bit version could enable better performance, and I will do
it in the next version.
For endianness, see my comments below (inline):
On Mon, Feb 20, 2023 at 12:19 PM Dumitrescu, Cristian <
cristian.dumitre...@intel.com> wrote:
> HI Bili,
>
> Comments inline below:
>
> <snip>
>
> > diff --git a/lib/hash/rte_hash_xor.h b/lib/hash/rte_hash_xor.h
> > new file mode 100644
> > index 0000000000..7004f83ec2
> > --- /dev/null
> > +++ b/lib/hash/rte_hash_xor.h
> > @@ -0,0 +1,65 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2023 Intel Corporation
> > + */
> > +
> > +#ifndef _RTE_HASH_XOR_H_
> > +#define _RTE_HASH_XOR_H_
> > +
> > +/**
> > + * @file
> > + *
> > + * RTE XOR Hash
> > + */
> > +
> > +#ifdef __cplusplus
> > +extern "C" {
> > +#endif
> > +
> > +#include <stdint.h>
> > +
> > +#include <rte_byteorder.h>
> > +
> > +#define LEFT8b_MASK rte_cpu_to_be_32(0xff000000)
>
> I know that cpu_to_be() and be_to_cpu() are doing the same thing, but to
> me the correct function to use here is be_to_cpu(), as the for loop in the
> function below works with values in the CPU endianness. Would you agree?
>
What I have in mind is the 0xff000000 literal is in CPU endianness, and I'm
converting it to big-endian. For performance reasons, I think it's better
to work in big-endian in the loop.
Also as Vladimir suggested above, I'll remove these masks and switch to
using shifts directly. So I guess this won't matter anymore.
>
> > +#define LEFT16b_MASK rte_cpu_to_be_32(0xffff0000)
>
> I know that cpu_to_be() and be_to_cpu() are doing the same thing, but to
> me the correct function to use here is be_to_cpu(), as the for loop in the
> function below works with values in the CPU endianness. Would you agree?
>
> > +
> > +/**
> > + * Calculate XOR32 hash on user-supplied byte array.
> > + *
> > + * @param data
> > + * Data to perform hash on.
> > + * @param data_len
> > + * How many bytes to use to calculate hash value.
> > + * @param init_val
> > + * Value to initialise hash generator.
> > + * @return
> > + * 32bit calculated hash value.
> > + */
> > +static inline uint32_t
> > +rte_hash_xor(const void *data, uint32_t data_len, uint32_t init_val)
> > +{
> > + uint32_t i;
> > + uintptr_t pd = (uintptr_t) data;
> > + init_val = rte_cpu_to_be_32(init_val);
> I don't think this is correct, I the correct version here is to remove the
> above assignment, as I think the intention of this function (for
> performance reasons) is to do the endianness conversion only when needed,
> which is once at the end of the function (and also when handling the 2-byte
> and 1-byte left-overs).
>
What I have in mind is to convert init_val to big-endian once here, instead
of having to convert every byte array chunks from big-endian to host endian
in the loop (more conversions, worse performance, see comment below).
>
> > +
> > + for (i = 0; i < data_len / 4; i++) {
> > + init_val ^= *(const uint32_t *)pd;
>
Look at this line, if init_val is still in host endianness, we need to do
init_val ^= rte_be_to_cpu_32(*(const uint32_t *)pd) instead.
I think the essential tradeoff here is that, if we convert init_val from
host to be and back, we pay the constant cost of 2 conversions. The
alternative is to convert byte array chunks from be to host. The number of
conversions depends on data_len. Now I think of it more, maybe the best
option is to condition on the value of data_len, and choose the method with
fewer conversions.
> > + pd += 4;
> > + }
> > +
> > + if (data_len & 0x2) {
> > + init_val ^= *(const uint32_t *)pd & LEFT16b_MASK;
> > + pd += 2;
> > + }
> > +
> > + if (data_len & 0x1)
> > + init_val ^= *(const uint32_t *)pd & LEFT8b_MASK;
> > +
> > + init_val = rte_be_to_cpu_32(init_val);
> > + return init_val;
> > +}
> > +
>
> Due to the XOR properties (endianness-insensitivity, no carry bits, etc)
> and for performance reasons, I would also recommend implementing a 64-bit
> version of this function (while keeping the 32-bit result), similar to this:
>
> uint64_t *data64 = (uint64_t *)data;
> uint64_t result = init_data;
>
> /* Read & accumulate input data in 8-byte increments. */
> for (i = 0; i < data_len / 8; i++)
> result ^= *data64++;
>
> data_len &= 0x7;
>
> /* Handle any remaining bytes in the input data (up to 7 bytes). */
> if (data_len >= 4) {
> uint32_t *data32 = (uint32_t *)data64;
>
> /* Read and accumulate the next 4 bytes from the input data. */
> result ^= *data32++;
> data_len -= 4;
>
> if (data_len >= 2) {
> uint16_t *data16 = (uint16_t *)data32;
>
> /* Read and accumulate the next 2 bytes from the input
> data. */
> result ^= *data16++
> data_len -= 2;
>
> if (data_len) {
> uint8_t *data8 = (uint8_t *)data8;
>
> /* Read and accumulate the next byte from the
> input data. */
> result ^= *data8;
> }
> }
> }
>
> /* Accumulate the upper 32 bits on top of the lower 32 bits. */
> result ^= result >> 32;
>
> /* Single endianness swap at the very end. */
> return rte_cpu_to_be32((uint32_t)result);
>
> What do you think?
>
> Regards,
> Cristian
>
>
