Regards,
Asaf Penso

>-----Original Message-----
>From: nipun.gu...@nxp.com <nipun.gu...@nxp.com>
>Sent: Friday, October 9, 2020 4:14 PM
>To: dev@dpdk.org
>Cc: NBU-Contact-Thomas Monjalon <tho...@monjalon.net>;
>ferruh.yi...@intel.com; arybche...@solarflare.com;
>hemant.agra...@nxp.com; sachin.sax...@nxp.com; rohit....@nxp.com;
>jerinjac...@gmail.com; step...@networkplumber.org; Asaf Penso
><as...@nvidia.com>; Nipun Gupta <nipun.gu...@nxp.com>
>Subject: [PATCH 3/3 v3] app/testpmd: support hardware offload to drop error
>packets
>
>From: Nipun Gupta <nipun.gu...@nxp.com>
>
>With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
>capability, and separate DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL capability to
>drop all error packets in hardware, testpmd showcases this with a new added
>configuration option 'enable-hw-drop-err-all'.
>
>Signed-off-by: Nipun Gupta <nipun.gu...@nxp.com>
Reviewed-By: Asaf Penso <as...@nvidia.com>
>---
> app/test-pmd/parameters.c             | 7 +++++++
> app/test-pmd/testpmd.c                | 8 ++++++++
> app/test-pmd/testpmd.h                | 1 +
> doc/guides/testpmd_app_ug/run_app.rst | 4 ++++
> 4 files changed, 20 insertions(+)
>
>diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
>1ead59579..508612426 100644
>--- a/app/test-pmd/parameters.c
>+++ b/app/test-pmd/parameters.c
>@@ -142,6 +142,7 @@ usage(char* progname)
>       printf("  --enable-hw-vlan-strip: enable hardware vlan strip.\n");
>       printf("  --enable-hw-vlan-extend: enable hardware vlan extend.\n");
>       printf("  --enable-hw-qinq-strip: enable hardware qinq strip.\n");
>+      printf("  --enable-hw-drop-err-all: enable hardware packet drop for
>+all error packets.\n");
>       printf("  --enable-drop-en: enable per queue packet drop.\n");
>       printf("  --disable-rss: disable rss.\n");
>       printf("  --port-topology=<paired|chained|loop>: set port topology
>(paired "
>@@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
>               { "enable-hw-vlan-strip",       0, 0, 0 },
>               { "enable-hw-vlan-extend",      0, 0, 0 },
>               { "enable-hw-qinq-strip",       0, 0, 0 },
>+              { "enable-hw-drop-err-all",     0, 0, 0 },
>               { "enable-drop-en",            0, 0, 0 },
>               { "disable-rss",                0, 0, 0 },
>               { "port-topology",              1, 0, 0 },
>@@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
>                               rmv_interrupt = 0;
>                       if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
>                               flow_isolate_all = 1;
>+                      if (!strcmp(lgopts[opt_idx].name,
>+                                      "enable-hw-drop-err-all")) {
>+                              rx_err_pkt_drop_all = 1;
>+                      }
>+
>                       if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
>                               char *end = NULL;
>                               n = strtoull(optarg, &end, 16);
>diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
>ccba71c07..c9e7397e6 100644
>--- a/app/test-pmd/testpmd.c
>+++ b/app/test-pmd/testpmd.c
>@@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
>  */
> uint8_t rmv_interrupt = 1; /* enabled by default */
>
>+/*
>+ * Drop all RX error packets on HW itself.
>+ */
>+uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
>+
> uint8_t hot_plug = 0; /**< hotplug disabled by default. */
>
> /* After attach, port setup is called on event or by iterator */ @@ -3359,6
>+3364,9 @@ init_port_config(void)
>                   (rte_eth_devices[pid].data->dev_flags &
>                    RTE_ETH_DEV_INTR_RMV))
>                       port->dev_conf.intr_conf.rmv = 1;
>+
>+              if (rx_err_pkt_drop_all)
>+                      port->dev_conf.err_pkt_drop_conf.all = 1;
>       }
> }
>
>diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
>c7e7e41a9..eab154ed4 100644
>--- a/app/test-pmd/testpmd.h
>+++ b/app/test-pmd/testpmd.h
>@@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-
>device-start" parameter */  extern volatile int test_done; /* stop packet
>forwarding when set to 1. */  extern uint8_t lsc_interrupt; /**< disabled by "-
>-no-lsc-interrupt" parameter */  extern uint8_t rmv_interrupt; /**< disabled
>by "--no-rmv-interrupt" parameter */
>+extern uint8_t rx_err_pkt_drop_all; /**< enabled by
>+"--enable-hw-drop-err-all" parameter */
> extern uint32_t event_print_mask;
> /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
>extern bool setup_on_probe_event; /**< disabled by port setup-on iterator
>*/ diff --git a/doc/guides/testpmd_app_ug/run_app.rst
>b/doc/guides/testpmd_app_ug/run_app.rst
>index e2539f693..20f2f8083 100644
>--- a/doc/guides/testpmd_app_ug/run_app.rst
>+++ b/doc/guides/testpmd_app_ug/run_app.rst
>@@ -213,6 +213,10 @@ The command line options are:
>
>     Enable hardware QINQ strip.
>
>+*  ``--enable-hw-drop-err-all``
>+
>+    Enable hardware packet drop for any error packets
>+
> *   ``--enable-drop-en``
>
>     Enable per-queue packet drop for packets with no descriptors.
>--
>2.17.1

Reply via email to